查看所有试题
- 生产经营单位申请应急预案备案,应当提交()材料。最大班女工在()人以上的工业企业,应设女工卫生室,且不得与其他用室合并设置。从事视屏作业的人员,最易引起()过度疲劳。应急预案备案申请表#
应急预案评审或者论
- 劳动者接触职业性有害因素,一定就会发生职业危害正确#
错误
- 患职业病的情形,不属于工伤。根据《工作场所职业病危害警示标识》(GB.Z158-2003)中的规定,在高毒物品作业场所,应设置()色警示线。正确#
错误红#
黄
绿
- 对从事接触职业病危害的作业的劳动者,用人单位应当按照国务院卫生行政部门的规定组织上岗前、在岗期间和离岗时的职业健康检查,并将检查结果如实告知劳动者,职业健康检查费用由个人承担。生产性粉尘按性质不同可分为
- 有些患有遗传性疾病和遗传缺陷的人易受危害而患职业病。目前我国生产性粉尘的卫生标准有()、总粉尘浓度和呼吸性粉尘容许浓度。正确#
错误时间加权平均容许浓度#
工人接触时间肺总通气量
粉尘浓度超标倍数
- 工作场所有害物质最高容许浓度通常是以每立方米的空气中含毒物的毫克数来表示的,单位是mg/m3。下列哪项内容不属于健康监护的基本内容?正确#
错误A、职业病的治疗#
B、定期体检
C、建立健康监护档案
- 生产经营单位应当组织开展本单位的应急预案培训活动,使有关人员()。用人单位对不适宜从事原工作的职业病病人,应当()。单位应建立健全劳动防护用品的购买、验收、保管、()等管理制度;并应按照劳动防护用品的使
- 职业病病人变动工作单位,其依法享有的待遇()职业病病人依法享受国家规定的职业病待遇()。防尘用的个体防护用品是用来保护劳动者不受粉尘危害,按人体的防护部位可分为()防尘用品和身体防尘用品两大类。根据《工
- 一氧化碳中毒主要是急性中毒。轻度中毒表现为头昏、眼花、剧烈头痛、耳鸣、颈部压迫感和搏动感,并伴有恶心、呕吐、心悸、四肢无力等,甚至出现短的昏厥。慢性三硝基甲苯(TNT•梯恩梯)中毒的主要临床表现之一为中毒性
- 生产环境监测和职业健康监护是对职业病危害因素进行评估的重要手段化学性皮肤灼伤包括:()下列()属于化学性危害因素。正确#
错误A、轻度灼伤#
B、中度灼伤#
C、重度灼伤#
D、极度灼伤工业毒物#
振动
高温
- 凡确诊患有职业病的职工,可由企业决定是否享受国家规定的工伤保险待遇或职业病待遇。《工业企业设计卫生标准》中规定当机械通风系统采用部分循环空气时,送入工作场所空气中有害气体、蒸汽及粉尘的含量,不应超过规定
- 硫化氢为无色低浓度时带有臭鸡蛋样气味的气体,高浓度时使嗅觉麻痹,故难以凭嗅味强弱来判断其危险浓度。《职业性接触毒物危害程度分级》(GB.5044-85)中,铅及其化合物属毒物()级。正确#
错误I
II#
III
- 极易挥发,因此在苯的生产和使用过程中不易发生中毒。根据《工作场所职业病危害警示标识》(GBZ158-2003)中的规定,在高毒物品作业场所,应设置()色警示线。根据《工作场所职业病危害警示标识》(GBZ158-2003)中的
- 重体力劳动、不良的体位、接触化学毒物、物理危害等情况对孕妇健康有影响。因此不得安排孕期、哺乳期的女职工从事对本人和胎儿、婴儿有危害的作业有毒作业工作环境中,接触有毒物品的作业工人,应选择的个体防护用品有
- 职业病防治工作坚持预防为主、防治结合的方针,实行分类管理、综合治理职业病防治工作应坚持()的方针,实行分类管理,综合治理。毒物是指()。在有毒化学品泄漏区域,对人员进行撤离时,应该()。正确#
错误A、安全第
- 工作场所有害物质最高容许浓度是指在工作地点、一个工作日内、任何时间都不应超过的有毒化学物质的浓度。生产经营单位()采购和使用无安全标志的特种劳动防护用品,购买的特种劳动防护用品须经本单位的安全生产技术
- 毒物对人体的危害不仅取决于毒物的毒性,还取决于毒物的危害程度。人的眼睛如果长期受到红外线辐射,将会导致()。正确#
错误青光眼
白内障#
结膜炎
- 电光性眼炎是紫外线过量照射所引起的急性角膜炎,是一种常见的职业病。常发生于电焊、气焊、氧焰切割、电弧炼钢,以及使用弧光灯、水银灯、紫外灯的作业场所及岗位,其中以电焊工最多见。正确#
错误
- 职业性接触毒物系指工人在生产中接触以原料、成品、半成品、中间体、反应副产物和杂质等形式存在,并在操作时可经呼吸道、皮肤或经口进入人体而对健康产生危害的物质。根据《工业企业设计卫生标准》,每个工作日接触噪
- 当机械通风系统采用部分循环空气时,送入工作场所空气中有害气体、蒸汽及粉尘的含量,不应超过规定的接触限值的30%。我们卫生部门公布的法宝职业病中有()种尘肺?职业病危害因素检测、评价由依法设立的取得()以上
- 激光对人体的伤害主要是皮肤,其次是眼睛。职业危害能否引起职业病,主要取决于接触的(),即接触的时间和浓度。正确#
错误A、形式
B、剂量#
C、多少
- 预防振动危害的措施主要是从工艺改革入手,个体防护以及建立合理的劳动制度也很重要。《工作场所有害因素职业接触限值》中有害物质的最高容许浓度采用的计量单位是()。正确#
错误mg/m3#
ppm
g/l
- 因生产事故可能发生化学性灼伤及经皮肤吸收引起急性中毒的工作地点或车间,应设事故淋浴,并应设置不断水的供水设备。()只是一道阻止有害物进入人体的屏障,只能作为一种辅助性措施。为做好职业病前期预防,用人单位与
- 用人单位对不适宜继续从事原工作的职业病病人,应当调离原岗位,让其下岗。当作业场所空气中有害化学品气体的浓度超过国家规定标准时,工人必须使用适当的()。()呼吸器只能在不缺氧的工作环境和低浓度毒污染环境中
- 接触性皮炎不属于职业性皮肤病的一种。2002年卫生部、劳动和社会保障部公布的职业病目录中列出的法定尘肺不包括:()根据《工作场所职业病危害警示标识》(GBZ158-2003)中的规定,警示线设在使用有毒作业场所外缘不
- 预防红外线伤害主要是穿戴防护服和防护帽。严禁裸眼看强光。生产中应戴绿色玻璃防护镜,镜片中需含有氧化亚铁或其他过滤红外线的有效成分。不同的职业危害对人体的危害不同,如()可导致尘肺病。根据《工作场所职业病
- 粉尘的化学组成、浓度、分散度与健康的关系不大。正确#
错误
- 各单位应根据生产工艺和粉尘、毒物特性,采取防尘防毒通风措施控制其扩散,使工作场所有害物质浓度达到《工作场所有害因素职业接触限值》(GB.Z2—2002)要求《工作场所职业病危害警示标识》规定了在工作场所设置的可以
- 《职业性接触毒物危害程度分级》规定,危害程度指化学物质在生产和使用下产生损害的可能性,取决于接触方式、接触时间和接触量、防护设备的良好程度等。职业病病人依法享受国家规定的职业病待遇()。正确#
错误安排职
- 空气中含有病原体、恶臭物质(例如毛类、破烂布分选、熬胶等)及有害物质浓度可能突然增高的工作场所,可以采用循环空气作热风采暖和空气调节。有毒作业分级的三项指标:毒物危害程度级别、有毒作业劳动时间、()。
- 根据《有毒作业分级》标准(GB.12331一90),有毒作业分级依据三项指标即毒物危害程度级别、有毒作业劳动时间、毒物浓度超标倍数。正确#
错误
- 《工业企业设计卫生标准》规定,厂房内的设备和管道必须采取有效的密封措施,防止物料跑、冒、滴、漏,杜绝无组织排放。毒物进入体内的总量超过转化和排出总量时,体内的毒物就会逐渐增加,有毒气体超标并空气不流通)时,
- 职业病危害因素检测、评价由依法设立的取得县级以上人民政府卫生行政部门资质认证的职业卫生技术服务机构进行。在工业生产过程中,毒物最主要是通过()途径进入人体的。眼部溅入毒物后,应立即(),并尽可能请医生诊
- 矽肺是长期吸入大量含游离二氧化硅粉尘所引起的肺组织纤维化为主的全身疾病,最为严重,也最常见,通常是指空气中氧气的体积浓度低于()。在密闭场所(氧气浓度小于18%,应选用的个体防护用品为()。在车间的生产过程
- 粉尘对人体造成的危害除了造成尘肺病外,还有间质肺炎、过敏性肺泡炎、呼吸系统肿瘤等。特种劳动防护用品安全标志管理工作由()指定的特种劳动防护用品安全标志管理机构实施,受指定的特种劳动防护用品安全标志管理机
- 生产过程的密闭化、湿式作业、自动化是解决毒物危害的根本途径用纯氮气置换可燃气体后进入密闭罐内作业,在没有任何个体防护措施时,作业人员有可能发生()。根据《工作场所职业病危害警示标识》(GBZ158-2003)中的
- 国家对职业病危害建设项目实行分类管理。对可能产生职业病危害的建设项目分为职业病危害轻微、职业病危害一般和职业病危害严重三类。毒物进入体内的总量超过转化和排出总量时,体内的毒物就会逐渐增加,这种现象称为毒
- 卫生部、劳动和社会保障部发布的《职业病目录》中规定职业病种类有十大类共99种。职业病危害是指对从事职业活动的劳动者可能导致职业病的各种危害。职业病危害因素包括():用人单位不得安排未成年人和孕期、哺乳期
- 生产性毒物对机体的作用很大程度上取决于毒物的浓度与接触时间。慢性三硝基甲苯(TNT•梯恩梯)中毒的主要临床表现之一为中毒性()。正确#
错误肺炎
肝炎#
肾炎
- 职业病,是指企业、事业单位的劳动者,因接触粉尘、放射性物质和其他有毒、有害物质等因素而引起的疾病。新建建设项目可能产生职业病危害的,建设单位在可行性论证阶段应当向卫生行政部门提交()。一旦经皮肤接触毒物,