查看所有试题
- Abis口采用E1传输时,B8018支持以下哪些组网方式()?A、星型组网#
B、树形组网#
C、环形组网#
D、链形组网#
- SDR基站的基带处理板是()。以下关于B8018基站叙述错误的是()。关于ZXG10B8018设备CMB单板描述正确的是()。基站载频LapD大面积瞬断的可能原因有()。BS8800时钟参考源丢失告警告警原因有()。DTRU的功能包括
- 一块UBPG最大可处理的载波数是()。反应基站启动时信息的是()。基站拨码开关的哪一位拨错时,会导致基站无法启动()。A、2
B、6
C、8
D、12#A、O&M的信令跟踪#
B、CS的信令跟踪
C、SCCP的信令跟踪
D、PS信令
- FS单板具有()光口。手机单向通话的原因可以从以下几方面考虑()。A、2
B、6#
C、8
D、12A、手机单向通话,一般情况下是由于BSC与MSC之间的PCM时隙接续错误所致#
B、BSC的DRT时隙接续错误也可能导致此类现象#
C、BS
- SA可提供多少路E1/T1接口()。基带层数量最大为()。A、6
B、8#
C、12
D、24A、1
B、2#
C、3
D、4
- 1个BS8800基站(不带副柜)最大支持()个TRX?RSU60支持哪些频段()。A、12
B、24
C、36#
D、48A、850MHz#
B、900MHz#
C、1800MHz#
D、1900MHz#
- B8018的主控板是()。基站收发信台(BTS)属于基站系统的无线部分,是由基站控制器控制,服务于某个小区的无线收发信设备,一般包括基带单元、载频单元和()三部分?FS单板有几个光口()。RSU60光口链路指示灯是()
- DTRU的ACT灯红灯闪代表()。SE板的功能是()。CC板的ETH0作用是()。8018基站的拨码开关,对于ABIS_TS=16的情况,对应二位设置是(左边高位右边低位)()。发售加快票时,应在符合《铁路旅客运输规程》规定的前提
- BBU和RRU之间的传输介质为()。BS8800基站BBU包含哪些单板()。A、E1
B、FE
C、GE
D、光纤#A、FS#
B、PM#
C、CC#
D、SA#
E、UBPG/BPC#
F、FA#
- B8018基站开通后,可以通过查看DTRU的()指示灯,知道该载频是否是BCCH载频。以下关于ZXG10 B8018设备控制框背板BBCM描述正确的是()。A、ACT
B、MOD#
C、RUN
D、STAA、BBCM背板为控制操作维护单板(CMB.、Abis接口
- SA可提供多少路E1/T1接口()。80W等于()。从机顶发射功率角度考虑,SDR基站较传统基站具有的优势的根本原因是()。对于B8018基站,下列哪些告警是由于传输故障产生的()。FS(网络交换板)的功能有()。手机单向
- 8018基站开通时,如果基站不能正常下载版本。需要录制什么信令()。S板Ir光(电)丢失告警可能的原因是()。基站传输断,在告警管理界面查询到如下告警“E1/T1链路远端接收故障告警(E1/T1 remote receiving fault)”
- 天馈系统要求最大驻波比值不大于()。轻微驻波比告警的范围是()。从机顶发射功率角度考虑,SDR基站较传统基站具有的优势的根本原因是()。A、1.2
B、1.5#
C、2
D、1A、1.5>VSWR>1.2
B、3.0>VSWR>1.5#
- 手机单向通话的原因可以从以下几方面考虑()。A、手机单向通话,一般情况下是由于BSC与MSC之间的PCM时隙接续错误所致#
B、BSC的DRT时隙接续错误也可能导致此类现象#
C、BSC的DSN/BOSN板出现时隙接续的错误导致此类现
- SDR基站的主控板是()。CC板上E0S可指示的是()。A、CC板#
B、UBPG板
C、CMB板
D、SA板A、0-3路E1/T1状态#
B、4-7路E1/T1状态
C、8-11路E1/T1状态
D、12-15路E1/T1状态
- SDR基站的主控板是()。基带层数量最大为()。RSU60光口链路指示灯是()。下面哪个告警是和站点时钟无关的?()当B8018基站需要级联从柜时,使用机顶的()接口通过E1线连接到从柜。SDR基站中,负责射频信号处理的
- SDR基站的主控板是()。不会由传输故障引起的告警是()。8018基站直流工作电压允许变化范围是()。A、CC板#
B、UBPG板
C、CMB板
D、SA板A、BTS站点LapD断链
B、BTS站点操作维护断链
C、PPP链路断告警
D、IQ配置失
- SDR基站的主控板是()。反应基站启动时信息的是()。SA(现场告警板)有以下功能()。RU驻波比告警,通常是由下面()两种情况触发的?A、CC板#
B、UBPG板
C、CMB板
D、SA板A、O&M的信令跟踪#
B、CS的信令跟踪
- SDR基站的主控板是()。下列一般和基站驻波比告警无关的是()。EIB是无源单板,但是在PDM模块上有EIB开关,其原因是()。B8018基站提供10对外部环境干节点输入,()对干节点输出。关于ZXG10B8018设备CMB单板描述正
- B8018的主控板是()。B8018中不属于顶层框的单板是()。SDR基站的基带处理板是()。当B8018基站需要级联从柜时,使用机顶的()接口通过E1线连接到从柜。BBU和RRU之间的接口是()。天馈故障的一般处理方法有哪些
- EIB是无源单板,以下哪些属于上行覆盖增强技术()。A、预留开关,当DTRU开关损坏时,需要电源#
C、基站Abis口配置为IP时,需要替换为FIB单板,此开关为FIB使用,需要电源
D、设计失误A、基带IQ数据的交换#
B、提供BBU与RR
- Abis口采用E1传输时,B8018支持以下哪些组网方式()?A、星型组网#
B、树形组网#
C、环形组网#
D、链形组网#
- 下列一般和基站驻波比告警无关的是()。8018基站直流工作电压允许变化范围是()。A、载频故障
B、CMB故障#
C、CDU故障
D、天线故障A、212V~225V
B、-58V~-38V
C、-57V~-40V#
D、340V~360V
- ZXSDR BS8800在叠加副柜时,最大支持()TRX。B8018最大配置站型是?()80W等于()。当B8018基站需要级联从柜时,使用机顶的()接口通过E1线连接到从柜。BS8800基站SCTP偶联断开告警告警原因有()。查看DTRU指示灯
- 发售加快票时,应在符合《铁路旅客运输规程》规定的前提下,其发到站之间全程都应有()运行。在B8018中载频层有几层?()。FS单板具有()光口。时钟参考源丢失告警(告警码5)告警原因主要有()。快车#
始发快车
- ZXSDR R8860支持()个TRX。从机顶发射功率角度考虑,SDR基站较传统基站具有的优势的根本原因是()。双向无声故障的原因主要有以下几种()。ZXG10 B8018设备载频风机框可以配置哪些单板()。6A、SDR基站发射功率远
- ZXSDR R8860配置为支持4TRX,每载波功率为()。SA可提供多少路E1/T1接口()。多载波射频模块RSU60的主要功能有()。13wA、6
B、8#
C、12
D、24A、与基带框的通讯功能#
B、基站的中频和射频处理功能#
C、支持本地和
- B8018单机柜最大支持()个载频。以下哪种告警不是在CC板上产生的?()BS8800的电源模块是()。基站拨码开关的哪一位拨错时,会导致基站无法启动()。SDR基站中,负责射频信号处理的单板有()。V3基站设备类问题故
- 8018基站开通后,如果载频上有用户占用信道,通过DTRU板上的()灯可以看到有几个用户占用。B8018发生故障时,观察到CMB的SYN指示灯红亮,表示()。SE(现场告警扩展板)有以下哪些功能()。ACTA、E1链路断#
B、E1链路
- 8018基站单站点由多个机柜组成时,机柜之间需要连接线缆有()线缆和()线缆。SDR基站中,负责系统控制和时钟供给,并完成Abis/Iub接口的单板是()。DTRU的功能描述正确的是()。在配置O6站型的小区时,完成速率适配
- 8018基站提供10对外部环境干节点输入,()对干节点输出。以下关于ZXG10 B8018设备控制框背板BBCM描述正确的是()。BTS站点操作维护断的可能原因有()。BS8800时钟参考源丢失告警告警原因有()。PGND保护地线一般
- ZXSDR BS8800是一款双模室内型宏基站,同时支持()和()两种无线制式。一块UBPG最大可处理的载波数是()。SA单板可提供几路干接点接口?()CC(主控板)提供以下哪些功能()。ZXG10 B8018设备AEM模块的主要功能
- ZXG10 B8018基站开通后,如果载频上有用户占用信道,通过DTRU板上的()灯可以看到有几个用户占用。DTRU的ACT灯红灯闪代表()。RSU60可输出的最大功率为()。B8018单机柜最大支持()载频?1个BS8800基站(不带副柜
- ZXG10 B8018有拨码开关来标志层号的背板为()。RSU60的ANT1(TX/RX)接口作用是()。闭塞载频的操作是在()中进行。BBTRA、与发射、接收主集通道收发天线连接#
B、与接收分集通道天线连接
C、频点扩展输出接口
D
- SDR基站的BBU和RRU之间的CPRI速率为()。CC(主控板)提供以下哪些功能()。A、1Gbps
B、1.25Gbps#
C、1.5Gbps
D、2GbpsA、提供GPS系统时钟和射频基准时钟#
B、Abis/Iub接口功能#
C、以太网交换功能,提供信令流和
- ZXG10 B8018中当为3层时BBTR背板S1拨码第三位为()状态。B8018发生故障时,观察到CMB的SYN指示灯红亮,表示()。OFFA、E1链路断#
B、E1链路有误码
C、E1链路正常
D、E1链路通,但时钟没有同步
- B8018中不属于顶层框的单板是()。BS8800单机柜最多可支持的载波数为()。CC板的ETH0作用是()。1个ZXSDRB8200最大支持()个载波。SDR基站中,负责基带信号处理的单板是()。A、CMB
B、EIB
C、FIB
D、DTRU#A、6
- B8018主要负责BTS输入工作电源的滤波和分配的是()。以下关于ZXG10 B8018设备控制框背板BBCM描述正确的是()。A、CMB
B、PDM
C、EIB
D、PM#A、BBCM背板为控制操作维护单板(CMB.、Abis接口板(EIB/FIB.单板之间信
- BS8800单机柜射频单元可配置的载频数为()。RSU60可输出的最大功率为()。当B8018基站需要级联从柜时,使用机顶的()接口通过E1线连接到从柜。1个ZXSDRB8200最大支持()个载波。SDR基站中,负责IQ数据交换,并完成C
- 负责射频信号处理的单板有()。时钟参考源丢失告警(告警码5)告警原因主要有()。关于ZXG10 B8018设备EIB单板功能描述正确的是()。下列哪些操作跟处理SNTP对时失败告警相关()。BTS站点LapD断链;BTS站点操作