查看所有试题
- 当桩顶作用于一个正弦激振力时,一维应力波理论能适用于桩的前提是()。桩长度远大于桩径;#
激振力波长远大于桩径;#
激振力波长等于桩径;
桩材为均匀线弹性#
- 一根弹性杆的一维纵波速度为3000m/s,当频率为3000Hz的下弦波在该杆中传播时,进行频率分析后发现幅频曲线谐振峰间频差为250Hz,应选取同条件下不少于()根Ⅰ类桩的桩身波速参于平均波速的计算。桩身扩径在实测曲线上的
- 一根Φ为377mm长18m的沉管桩,低应变动测在时城曲线中反映在的桩底反射为12ms,其波速为()3200m/s
3000m/s#
1500m/s
- 桩身扩径在实测曲线上的表现是()。力值越大,速度值越大
力值越大,速度值减小#
力值减小,速度值减小
力值减小,速度值越大
- 对于应力波反射法,要检测桩身深部缺陷,应选用可产生较丰实的()信号的材质锤头。高频
低频#
宽频
窄频
- 对某一工地确定桩身波速平均值时,应选取同条件下不少于()根Ⅰ类桩的桩身波速参于平均波速的计算。桩身扩径在实测曲线上的表现是()。2个
4个
5个#
8个力值越大,速度值越大
力值越大,速度值减小#
力值减小,速度值减
- 桩身扩径在实测曲线上的表现是()。根据我国基桩检测的有关规范,检测桩身完整的测试方法有()力值越大,速度值越大
力值越大,速度值减小#
力值减小,速度值减小
力值减小,速度值越大低应变法#
声波透射法#
钻心法#
- 一根Φ为377mm长18m的沉管桩,(同上2题工地桩)对实测曲线分析发现有二处等距同相反射,进行频率分析后发现幅频曲线谐振峰间频差为250Hz,其缺陷部位在()。4m
6m#
8m
12m
- 桩身扩径在实测曲线上的表现是()。力值越大,速度值越大
力值越大,速度值减小#
力值减小,速度值减小
力值减小,速度值越大
- 对于应力波反射法,要检测桩身深部缺陷,应选用可产生较丰实的()信号的材质锤头。高频
低频#
宽频
窄频
- 对某一工地确定桩身波速平均值时,应选取同条件下不少于()根Ⅰ类桩的桩身波速参于平均波速的计算。低应变检测中一般采用速度传感器和加速传感器,加速度传感器的频响特性优与速度传感器,其频响范围一般为()。2个
4
- 低应变检测中一般采用速度传感器和加速传感器,加速度传感器的频响特性优与速度传感器,其频响范围一般为()。桩身缺陷在实测曲线上的表现是()0-KHz
0-2KHz
0-5KHz#
0-10KHz力值越大,速度值越大
力值越大,速度值减
- 一根弹性杆的一维纵波速度为3000m/s,当频率为3000Hz的下弦波在该杆中传播时,它的波长为()。桩身缺陷在实测曲线上的表现是()对于应力波反射法,要检测桩身深部缺陷,应选用可产生较丰实的()信号的材质锤头。根据
- 一根Φ为377mm长18m的沉管桩,(同上2题工地桩)对实测曲线分析发现有二处等距同相反射,进行频率分析后发现幅频曲线谐振峰间频差为250Hz,其缺陷部位在()。4m
6m#
8m
12m
- 低应变动测时,桩顶受力所产生的应力波,遇到桩身波阻抗变化时,将产生波的()反射#
折射
绕射
透射#
- 透射波的速度或应力在缩颈或扩颈处均()。不改变方向或符号#
改变方向不改变符号
不改变方向改变符号
改变方向改变符号
- 对于应力波反射法,欲提高分辨率,应采用高频成分丰富的力波,应选用()材质锤头。对某一工地确定桩身波速平均值时,应选取同条件下不少于()根Ⅰ类桩的桩身波速参于平均波速的计算。当在桩顶测出的反射波速度或应力与
- 当桩顶作用于一个正弦激振力时,一维应力波理论能适用于桩的前提是()。桩长度远大于桩径;#
激振力波长远大于桩径;#
激振力波长等于桩径;
桩材为均匀线弹性#
- 一根Φ为377mm长18m的沉管桩,低应变动测在时城曲线中反映在的桩底反射为12ms,其波速为()桩身扩径在实测曲线上的表现是()。当桩身存在着离析时,波阻抗变化主要表现为()的变化。3200m/s
3000m/s#
1500m/s力值越大
- 桩动测法的波速C指的是()。低应变检测中一般采用速度传感器和加速传感器,加速度传感器的频响特性优与速度传感器,其频响范围一般为()。测点处的波速
桩全长的平均波速
桩入土深度的平均波速
测点下桩长平均波速#0
- 低应变动测时,桩顶受力所产生的应力波,遇到桩身波阻抗变化时,将产生波的()反射#
折射
绕射
透射#
- 当在桩顶测出的反射波速度或应力与入射波信号极性一致,则表明在相应的位置存在()。截面缩小#
截面不变
与截面无关
截面扩大
- 当桩顶作用于一个正弦激振力时,一维应力波理论能适用于桩的前提是()。桩长度远大于桩径;#
激振力波长远大于桩径;#
激振力波长等于桩径;
桩材为均匀线弹性#
- 一根Φ为377mm长18m的沉管桩,(同上2题工地桩)对实测曲线分析发现有二处等距同相反射,进行频率分析后发现幅频曲线谐振峰间频差为250Hz,其缺陷部位在()。桩身缺陷在实测曲线上的表现是()4m
6m#
8m
12m力值越大,速
- 桩身缺陷在实测曲线上的表现是()当桩身存在着离析时,波阻抗变化主要表现为()的变化。对于应力波反射法,要检测桩身深部缺陷,应选用()材质锤头。力值越大,速度值越大
力值越大,速度值减小#
力值减小,速度值减小
- 一根Φ为377mm长18m的沉管桩,低应变动测在时城曲线中反映在的桩底反射为12ms,其波速为()3200m/s
3000m/s#
1500m/s
- 桩身缺陷在实测曲线上的表现是()力值越大,速度值越大
力值越大,速度值减小#
力值减小,速度值减小
力值减小,速度值越大
- 对于应力波反射法,欲提高分辨率,应采用高频成分丰富的力波,应选用()材质锤头。低应变检测中一般采用速度传感器和加速传感器,加速度传感器的频响特性优与速度传感器,其频响范围一般为()。硬橡胶
木
尼龙
铁#0-KHz
- 一根Φ为377mm长18m的沉管桩,低应变动测在时城曲线中反映在的桩底反射为12ms,其波速为()对某一工地确定桩身波速平均值时,应选取同条件下不少于()根Ⅰ类桩的桩身波速参于平均波速的计算。3200m/s
3000m/s#
1500m/s2
- 当在桩顶测出的反射波速度或应力与入射波信号极性一致,则表明在相应的位置存在()。截面缩小#
截面不变
与截面无关
截面扩大
- 一根弹性杆的一维纵波速度为3000m/s,当频率为3000Hz的下弦波在该杆中传播时,它的波长为()。一根Φ为377mm长18m的沉管桩,(同上2题工地桩)对实测曲线分析发现有二处等距同相反射,进行频率分析后发现幅频曲线谐振峰
- 对于应力波反射法,欲提高分辨率,应采用高频成分丰富的力波,应选用()材质锤头。桩身缺陷在实测曲线上的表现是()硬橡胶
木
尼龙
铁#力值越大,速度值越大
力值越大,速度值减小#
力值减小,速度值减小
力值减小,速度
- 当桩身存在着离析时,波阻抗变化主要表现为()的变化。根据我国基桩检测的有关规范,检测桩身完整的测试方法有()ρ
C.
A.
ρ•C#低应变法#
声波透射法#
钻心法#
高应变法#
- 对于应力波反射法,欲提高分辨率,应采用高频成分丰富的力波,应选用()材质锤头。桩身缺陷在实测曲线上的表现是()根据我国基桩检测的有关规范,检测桩身完整的测试方法有()硬橡胶
木
尼龙
铁#力值越大,速度值越大
- 当桩身存在着离析时,波阻抗变化主要表现为()的变化。ρ
C.
A.
ρ•C#
- 当桩身存在着离析时,波阻抗变化主要表现为()的变化。ρ
C.
A.
ρ•C#
- 一根Φ为377mm长18m的沉管桩,(同上2题工地桩)对实测曲线分析发现有二处等距同相反射,进行频率分析后发现幅频曲线谐振峰间频差为250Hz,其缺陷部位在()。4m
6m#
8m
12m
- 桩身扩径在实测曲线上的表现是()。透射波的速度或应力在缩颈或扩颈处均()。根据我国基桩检测的有关规范,检测桩身完整的测试方法有()对于低应变检测结果有争议时或通过低应变检测时发现下列情况时,应结合其他方
- 低应变的传感器主要技术性能指标有()、()、()。桩动测法的波速C指的是()。当桩顶作用于一个正弦激振力时,一维应力波理论能适用于桩的前提是()。灵敏度;频响特性;线性度测点处的波速
桩全长的平均波速
桩
- 一般低应变法测试的目的是测试桩的(),判断桩身缺陷的()和()。一根Φ为377mm长18m的沉管桩,低应变动测在时城曲线中反映在的桩底反射为12ms,其波速为()对于应力波反射法,要检测桩身深部缺陷,应选用可产生较丰实