查看所有试题
- 烧结用焦粉和煤粉最大区别是()含量不同。一般只规定P、S含量上限和力学性能指标下限,对其它质量要求一般不作规定的钢为()。A、挥发份#
B、灰份
C、胶质层A、普通质量钢#
B、优质钢
C、特殊质量钢
- 焦炭反应性的符号为()。矿石中有用成份的质量与矿石的质量的百分比叫矿石的()。A、CSR
B、M40
C、M10
D、CRI#A、含量
B、有效成分
C、品位#
- 烧结矿中残留有自由的CaO,称()。一座高炉连续出现3炉整炉废品为()级质量事故。热制度是指()热量的充沛程度。A、矿化作用
B、铁酸钙
C、白点#
D、同化作用A、一
B、二
C、三#
D、四A、炉腹
B、炉腰
C、炉缸#
- 二分器沟槽的宽度应是试样最大粒度的()倍。《铁矿石技术条件》要求入炉合格块矿8~40mm部分()。《烧结矿技术条件》TFe二级品允许波动()。A、1~2
B、1~3
C、2~3#A、≥50%
B、<50%
C、≥90%#
D、<90%A、±0.5%
- 硼铁中的硼元素在炼钢过程中的作用有()。A、提高钢的淬透性#
B、改善钢的力学性能#
C、固氮
D、细化晶粒#
- 《球团用铁精矿》要求赤铁矿平均-200目粒级()。高炉冶炼中,凡是用碳素还原,生成CO的还原反应叫做()。连铸板坯表面清理的要求是()。A、≥85%#
B、<85%
C、≥70%
D、<70%A、间接还原
B、直接还原#
C、分解还原A
- 《烧结矿技术条件》TFe二级品允许波动()。《球团矿技术条件》S二级品()。A、±0.5%
B、±0.8%#
C、±0.08%
D、±0.10%A、≤0.02%
B、>0.02%
C、≤0.05%#
D、>0.05%
- 备查化学分析用样品保存时限为()天。高炉使用熟料的作用()。A、10
B、20
C、30#
D、60A、有利于降低焦比#
B、有利于高炉顺行#
C、有利于改善生铁质量和提高产量#
- 筛分顺序,一般按筛孔()的顺序进行。《球团矿技术条件》FeO一级品允许波动()。废钢的检验项目有()。A、由大到小#
B、由小到大
C、任意筛A、≥1%
B、<1%#
C、>2%
D、≤2%A、斗重、配比#
B、尺寸、单重、种类#
C
- 《球团矿技术条件》TFe一级品允许波动()。废钢的检验项目中必须经过测量的是()。铁口中心线以下在生产中存有液态产品的部分叫()。含碳量增加,钢的()。在生产过程中需要特别控制质量和性能的钢,特别是是要严
- 硼铁中的硼元素在炼钢过程中的作用有()。炼铁工作者通常用生铁中的含()量来表示炉温。属于高强度船板的是()。A、提高钢的淬透性#
B、改善钢的力学性能#
C、固氮
D、细化晶粒#A、Mn
B、S
C、Si#
D、PA、B
B、AH
- 下面哪些是钼铁的特点:()。高炉在生产过程中,因某种原因中断生产,休风8小时,成为()。A、钼含量55%~60%#
B、熔点高#
C、易受潮
D、易生绣#A、长期休风#
B、计划检修
C、短时休风
- 《球团矿技术条件》抗磨指数二级品()。铁合金是由一种或两种以上的()与铁元素组成的合金。下列对连铸的描述正确的是()。Q235A•F钢号中“F”表示()。A、≥6%
B、<6%
C、<8%#
D、≥8%A、金属元素
B、非金属元素
- SiO2属于()脉石。规定煤识别码为()。GB/T为()代号。A、酸性#
B、碱性
C、中性A、“1”
B、“2”
C、“3”
D、“4”#A、国标#
B、企标
C、内控
- 备查水分样品保存时限为()小时。定形耐火材料检验批量为51-90块,份样块数为()块,允许不合格的块数为()块。A、8
B、16
C、24#
D、48A、1#
B、3
C、8
D、5#
- 矿石中有用成份的质量与矿石的质量的百分比叫矿石的()。A、含量
B、有效成分
C、品位#
- 焦炭鼓前振动筛的筛孔为()。下列哪个选项(),含量过高时,易导致炉渣难熔,影响炉渣的流动性。炼铁工作者通常用生铁中的含()量来表示炉温。A、100×100mm
B、60×60mm#
C、40×40mm
D、10×10mmA、SiO2
B、CaO
C、Al2
- 备查水分样品保存时限为()小时。JISG为()代号。A、8
B、16
C、24#
D、48A、国标
B、日标#
C、欧标