查看所有试题
- 洞挖工作面前方的岩体,一般情况下()扰动。A、不会;
B、三倍洞径范围内受;
C、两倍洞径范围内受;#
D、五倍洞径范围内受。
- 洞挖工作面前方的岩体,一般情况下()扰动。A、不会;
B、三倍洞径范围内受;
C、两倍洞径范围内受;#
D、五倍洞径范围内受。
- CGA、VGA标志着()的不同规格和性能。A、存储器;
B、打印机;
C、硬盘;
D、显示器。#
- 最大剪应力等于最大主应力与最小主应力()。监测工程的质量是在()形成的。差动电阻式仪器内部两条钢丝的电阻,若只是温度变化时,其电阻()。A、之和
B、之差
C、差的1/2#
D、差的1/4A、设计阶段;
B、施工阶段;
- 当量测混凝土坝内某处的空间应力时,应埋设()应变计组。A、三向;
B、四向;
C、五向;
D、九向。#
- 当隧洞围岩的变形速率()时,说明围岩趋向稳定。A、越来越大;
B、越来越小;#
C、不再变化;
D、产生突变。
- 大坝设防渗帷幕和排水孔主要是为了()。人们越来越多地把工程安全的判断寄希望于()。A、降低渗透压力;#
B、防止地下水流速太快;
C、止住地下水渗透;
D、减少渗流量。A、把好设计和施工关;
B、提高建筑材料品
- 观测堆石坝堆石体的沉降和水平位移通常使用()。混凝土面板坝的周边缝观测常用()。A、磁性沉降环;
B、正锤线;
C、垂直水平位移计;#
D、测斜仪。A、CF-12测缝计;
B、三向测缝计;#
C、变位计;
D、位移计。
- 渗压计SZ-8的检验(率定),规范规定测点数(),间距。A、6、160kPa;#
B、6、120kPa;
C、8、200kPa;
D、9、150kPa。
- 差动电阻式仪器内部两条钢丝的电阻,若只是温度变化时,其电阻()。A、一条增大,一条减小;
B、两条同时增大或减小;#
C、一条不变,一条变化;
D、都不变。
- 钻孔埋设多点位移计,钻孔轴线弯曲度应不大于半径,孔向偏差应小于()。引张线观测可采用读数显微镜,每一测次应观测两测回,两测回之差不得超过()。A、1度;
B、3度;#
C、5度;
D、8度。A、0.05mm;
B、0.1mm;
C、
- 地下洞室围岩不稳定的主要地质因素是()。洞挖工作面前方的岩体,一般情况下()扰动。A、岩层层面;
B、高地应力;
C、不利组合的软弱结构面;#
D、岩性较软。A、不会;
B、三倍洞径范围内受;
C、两倍洞径范围内受
- 声波在岩石中的传播速度,受节理裂隙的影响,越破碎的岩石,其波速()。洞挖工作面前方的岩体,一般情况下()扰动。观测堆石坝堆石体的沉降和水平位移通常使用()。A、越大;
B、越小;#
C、可大可小;
D、测不出。A
- 在混凝土坝内埋设小应变计、测缝计,埋设后均应作好标记,仪器顶部终凝的混凝土厚度过()以上时,守护人员方可离开。A、30cm;
B、40cm;
C、50cm;
D、60cm。#
- 地下洞室围岩不稳定的主要地质因素是()。A、岩层层面;
B、高地应力;
C、不利组合的软弱结构面;#
D、岩性较软。
- 重力坝的应力观测,一般是在溢流段和非溢流段上各选择()观测坝段。A、1个;
B、2个;#
C、3个;
D、任意个。
- 引张线观测可采用读数显微镜,每一测次应观测两测回,两测回之差不得超过()。A、0.05mm;
B、0.1mm;
C、0.15mm;#
D、0.3mm。