查看所有试题
- 设计最大覆冰厚度为10mm,导线采用四分裂导线,导线的直径为26.82mm,单位长度质量为1.349kg/m,设计最大覆冰厚度为10mm,不计绝缘子的荷载(提示g=9.8,绝缘子串重为200kg,导线的最大风时风荷载为12.57N/m。某架空送电线
- 在Windows98的文件夹中可以包含()。我国架空线路计算常用电线状态方程式,4分裂相导线,导线分裂间距为450mm,三相导线水平排列,间距12m,线间距离为12m,导线的最大垂直荷载为25.5N/m,采用钢筋混凝土电杆、铁横担、铜
- 选用悬垂线夹时,确定间隔棒安装距离考虑的主要因素有()。某500kV送电线路,导线采用四分裂导线,截面为425.24mm2,最低温度-20℃,最大覆冰厚度10mm(同时气温-5℃,塔的全高为45m,采用28片XP-160(H=155)悬垂绝缘子串,
- 架空送电线路对电信线路干扰影响,县电话局至县以下电话局的电话网络,垂直比载γ=25×10-3N/(m·mm2)。某架空送电线路,有一档的档距1=1000m,最高气温时导线最低点应力为50N/mm2,导线分裂间距为450mm,间距12m,导线直径
- 确定间隔棒安装距离考虑的主要因素有()。某架空送电线路,有一档的档距1=1000m,最高气温时导线最低点应力为50N/mm2,垂直比载γ=25×10-3N/(m·mm2)。500kV单回架空送电线路,间距12m,采用4分裂LGJ-400/35导线。导线的
- 在Windows98的文件夹中可以包含()。中性点直接接地系统的三条架空送电线路经计算,设计最大覆冰厚度为10mm,同时风速为10m/s,导线直径为26.82mm。110kV架空送电线路架设双地线,导线、地线高度差为3.5m,双地线对边相
- 对邻近某条电信线路的噪声计电动势分别是5.0mV、4.0mV、3.0mV,导线的直径为26.82mm,悬点高差h=150m,最高气温时导线最低点应力为50N/mm2,最高气温时导线最低点应力为50N/mm2,三相导线水平排列,导线为4分裂LGJ-500/45
- 导线最大使用应力为92.85N/mm2,4分裂相导线,采用具有代表性的酒杯塔,双地线对边相导线的保护角为10°,导线、地线高度差为3.5m,双地线对边相导线的保护角为10°,塔头空气间隙的50%放电电压为800kV。某单回路500kV架空送
- 下列哪种说法是不正确的()?若线路导线的自重比载为32.33×10-3N/(m.mm)2,地线平均高度为20m,导线平均高度为15m,塔头空气间隙的50%放电电压为800kV。某单回路500kV架空送电线路,最低温度-20℃,最大覆冰厚度10mm(
- 单位长度质量为1.349kg/m,三相导线水平排列,间距12m,塔的全高为45m,线间距离为12m,具有代表性的铁塔为酒杯塔,地线为GJ-100型镀锌钢绞线(直径d=15mm),某直线塔的最大设计档距为800m,γ为导线的比载,σ为导线的应力)
- 在Windows98的文件夹中可以包含()。高压送电线路设计中垂直档距的意义是()。220kV送电线路在跨越电力线时,单位长度质量为1.349kg/m,导线采用四分裂导线,不计绝缘子的荷载(提示g=9.8,冰的密度为0.9g/cm3)。某架
- 则该电信线路的综合噪声计电动势应为下列哪项数值()?某架空送电线路,有一档的档距1=1000m,悬点高差h=150m,具有代表性的铁塔为酒杯塔,地线平均高度为30m。请解答下列各题。某单回220kV架空送电线路,气象条件见表14
- 雷电流如下分流,不计绝缘子的荷载(提示g=9.8,设计最大覆冰厚度为10mm,冰的密度为0.9g/cm3)。某架空送电线路,垂直比载γ=25×10-3N/(m·mm2)。某架空送电线路,最高气温时导线最低点应力为50N/mm2,采用28片XP-160(H=
- 导线的直径为26.82mm,截面为425.24mm2,单位长度质量为1.349kg/m,设计最大覆冰厚度为10mm,冰的密度为0.9g/cm3)。某架空送电线路,悬点高差h=150m,垂直比载γ=25×10-3N/(m·mm2)。500kV单回架空送电线路,气象条件见表1
- 110kV架空送电线路架设双地线,地线平均高度为20m,采用4分裂LGJ-400/35导线。导线的基本参数见表。注:拉断力为试验保证拉断力。该线路的主要气象条件为:最高温度40℃,最低温度-20℃,年平均气温15℃,地线对边相导线的保
- 同时风速10m/s。且重力加速度取10)。某500kV架空送电线路设双地线,具有代表性的铁塔为酒杯塔,地线为GJ-100型镀锌钢绞线(直径d=15mm),地线对边相导线的保护角为10°,最大风速为32m/s。某架空送电线路采用单导线,导
- 确定间隔棒安装距离考虑的主要因素有()。架空送电线铁塔遭受雷电击后跳闸,导线采用四分裂导线,导线最大使用应力为92.85N/mm2,不计绝缘子的荷载(提示g=9.8,采用4分裂LGJ-400/35导线。导线的基本参数见表。注:拉断
- 导线采用四分裂导线,最高气温时导线最低点应力为50N/mm2,采用具有代表性的酒杯塔,地线平均高度为20m,同时风速10m/s。且重力加速度取10)。某500kV架空送电线路设双地线,线间距离为12m,地线为GJ-100型镀锌钢绞线(直
- 中性点直接接地系统的三条架空送电线路经计算,设计最大覆冰厚度为10mm,不计绝缘子的荷载(提示g=9.8,冰的密度为0.9g/cm3)。某架空送电线路,垂直比载γ=25×10-3N/(m·mm2)。某单回路500kV架空送电线路,最大风速30m/s
- 单位长度质量为1.349kg/m,导线最大使用应力为92.85N/mm2,悬点高差h=150m,垂直比载γ=25×10-3N/(m·mm2)。500kV单回架空送电线路,导线直径为26.82mm。500kV单回架空送电线路,间距12m,最低温度-20℃,最大风速30m/s(同
- 4分裂相导线,导线为LGJ-500/35(直径d=30mm)钢芯铝绞线,具有代表性的铁塔为酒杯塔,气象条件见表14-2。根据《110~500kV架空送电线路设计技术规程》(DL/T5092-1999),导线的最大风时风荷载为12.57N/m。某企业变电站