查看所有试题
- 完全互换装配法的特点是()对工人技术水平要求高
装配质量稳定#
产品维修方便#
不易组织流水作业
- 下列方法中可以消除黑色断口缺陷的是()重新淬火,中间充分退火
重新回火两次
重新锻造#
重新退火
- 模具材料发展趋向正确的是()单电极平动法的特点是()碳素工具钢→低合金工具钢→高合金材料→高合金工具钢
低合金工具钢→碳素工具钢→高合金工具钢→高合金材料
碳素工具钢→低合金工具钢→高合金工具钢→高合金材料#
碳
- 将微小直径的玻璃珠与压缩空气一起喷射,大量去除飞边、锈迹、鲮屑等最终形成暗光泽面的抛光加工方法是()9Mn2V钢中的Mn可以()。.玻璃珠喷射法#
压缩空气喷射法
喷射除锈法
暗光泽面法减少其过热敏感性
提高其淬透
- 在其他条件相同时,气体氮碳共渗的温度与渗层厚度的关系是()锤锻模的磨损失效机理有()电解加工与被加工材料的()无关,故可加工任何金属材料。温度越高,渗层越薄
温度越低,渗层越厚
温度越高,渗层越厚#
渗层厚度
- 在加工过程中,间接获得最后保证的尺寸被称为()封闭环#
组成环
增环
减环
- 当粘着磨损的粘着点强度比模具和工件硬度高得多且粘着点面积较大时,将发生()冲裁模试冲时,冲压件不平的原因有()涂抹
擦伤
胶合#
氧化磨损落料凹模有上口小、下口大的正锥度
级进模中,导正钉与预冲孔配合过紧,将
- 复合模的特点是结构紧凑、冲压生产效率高和()内、外型相对位置精度要求低
内、外型相对位置精度要求高#
刃口易损坏
刃口不易损坏
- 挤压研磨抛光的特点是()。适用范围小,但抛光效果好,研磨抛光效率高
适用范围广,抛光效果好,研磨抛光效率高#
适用范围广,抛光效果一般,但研磨抛光效率高
适用范围广,抛光效果好,但研磨抛光效率低
- 高速锤锻模具主要选用()。低耐热性能钢
中耐热韧性钢#
高耐热性韧性钢
高速钢
- 下列不属于型腔加工方法的是()。下列不属于模具的电加工表面层的选项是()。塑料模具的主要失效形式除了磨损失效、塑性变形失效外,还有()。A、电火花成形
B、线切割#
C、普通铣削
D、数控铣削熔融残留层
附着碳
- Cr12和Cr12MoV一般用作冷作模具钢,其在锻造之后常采用什么热处理工艺作为预先热处理工艺()。可使零件外圆面加工椿度为IT8及表面粗糙度为Ra1.6μm的终了加工方法是()等温球化退火#
调质处理
高温回火
正火粗磨#
半
- 将研具表面嵌入磨料或敷涂磨料并添加润滑剂,在一定压力作用下,使研具与工件接触并作相对运动,通过磨料作用,从件表面切去一层极薄的切屑,使工件具有精确尺寸、准确几何形状和较低表面粗糙度,这种对表面进行最终精密加
- 拟合方式有直线方式和()A、曲线方式
B、短线方式
C、圆弧方式#
D、多短线方式