查看所有试题
- 板坯CCM的运行模式为()。A.准备模式、插入模式、保持模式、浇铸模式、引技模式#
B.引技模式、浇铸模式、保持模式、插入模式、准备模式
C.浇铸模式、保持模式、插入模式、准备模式、引技模式
- 连铸采用气水冷却采用的气水比应为()。1.0
0.5
0.05#
0.001
- 浇铸过程中急降速温,会造成()内部质量问题。A.中心裂纹#
B.角横裂
C.纵裂
- 随着含碳量的增加,结构钢的屈服强度、抗拉强度()。纯金属为了使之强化的方法应选择()。提高#
降低
不变
以上答案都不对A.冷轧或冷拔#
B.淬火加高温回火
C.低温退火
D.正火
- 银铜材质结晶器铜板的再结晶温度是()℃左右。150mm×150mm连铸坯,保持V=1.5m/min,比水量1.5L/kg钢时,凝固系数K=29.5mm/min1/2。其液芯长度为()。使用割矩的要求是()。200
350#
700
850A.[150/(2×29.5)]×1.5
- 钢中大型夹杂物的尺寸()大于50微米#
大于100微米
大于150微米
100-150微米
- 普碳钢的液相线温度为()左右。近终形连铸机指的是:()。铸坯毛刺清理不彻底易造成轧制的()缺陷。1501℃
1541℃
1521℃#
1531℃A.出铸机完全凝固
B.出结晶下口完全凝固
C.出铸机连铸坯接近成品#A.结疤#
B.分层
- 结晶器铜板的材质为银铜,其再结晶温度是()左右。连铸坯的低倍组织是指:()。铸坯采用多点矫直,而不采用单点矫直,是为了减轻()。200℃
350℃#
700℃
500℃A.切割完以后,观察到的组织
B.切割完以后,磨光观察到的组
- Q345钢中“345”的代号为()力学性能指标。为提高拉速,目前连铸界人士正为减少()热阻,致力于开发结晶器铜管的最佳形状。屈服强度#
抗拉强度
延伸率
冲击韧性A.凝固坯壳
B.渣膜
C.气隙#
- 铸坯的“干式冷却”的概念是:()。侧视图是物体()的投影。洛氏硬度的正确标注应选择()。A.铸坯喷水冷却而不喷气
B.铸坯不喷水,靠辐射和辊子冷却#
C.铸坯只喷气,而不喷水A.从上向下
B.由前向后
C.由左向右#
- 钢中铝元素对钢性能的影响是()弧形连铸机弧形段内外弧喷水量是()。带液芯矫直通常应用在()连铸机中。粗化晶粒,降低塑性,增加强度
细化晶粒,提高抗腐蚀性
降低抗腐蚀性
细化晶粒,改善冲击性能#A.内弧比外弧大
- 钢包吹氩的主要作用是()。一般来说,钢包内钢水吹入氩气时,能使钢中氮含量()调温
防止钢水氧化
均匀夹杂物成分
去除夹杂#增加
降低#
有时增加,有时降低
不变
- 钢中的Cu元素会恶化铸坯的表面()。纵裂
横裂
星裂#
夹杂