查看所有试题
- 表面夹渣的产生原因之一是()。浇铸温度是()。A.结晶器变形
B.结晶器液面波动#
C.钢水硫含量过高
D.钢水温度不均结晶器内的钢水温度
中间包内的钢水温度#
到达平台的钢水温度
- 铸坯的内部缺陷主要决定于()铸坯的冷却过程。A.结晶器
B.二冷段#
C.矫直点
- 中间包烘烤,点火操作程序正确的是()。A.先点火再开煤气#
B.先开煤气再点火
C.边开煤气边点火
- 皮下气泡产生的原因是()。正常浇注时,更换结晶器保护渣应()。A.钢中氧含量过高#
B.振痕太深
C.结晶器变形
D.钢水温度不均A.适当降速#
B.不降速
C.大幅降速
- 皮下气泡产生的原因是()。火焰切割的基本原理与手工气割原理是()的。A.钢中氧含量过高#
B.振痕太深
C.结晶器变形
D.钢水温度不均A.完全相同#
B.不相同
C.不完全相同
- 中间包永久层一般采用()型。碳粒在连铸保护渣中起着的()作用。A.砌砖#
B.打结
C.挂绝热板
D.涂料A.熔速调节剂#
B.助熔剂
C.基础渣料
- 弧表连铸机的设备对弧就是()。A.结晶器及其足辊、二次冷却段及拉矫机的外弧辊面调整在同一弧线上,误差≤0.5mm#
B.结晶器铜管的弧线与二次冷却装置夹辊的弧线对正
C.结晶器和定径水口,浸入式水口成一直比线
- 当铸坯采用带液芯多点矫直时,矫直点越多铸坯应变则()。A.越小#
B.越大
C.不变
- 与其它两种结构相比,中包采用()结构可以改善中包内流股状态,促进夹杂物上浮。A.无挡渣墙
B.单挡渣墙
C.双挡渣墙#
- 连铸坯切割长度是按()要求确定的。A.液芯长度
B.连铸机长度
C.铸坯断面
D.轧钢#
- 碳是决定钢的()的主要元素。A.朔性
B.延伸率
C.强度#
- 在浇钢过程中,结晶器正常液面应控制距结晶器上口()处。A.50mm
B.100mm#
C.150mm
- 转炉炼钢碳氧化反应主要发生在冶炼()期。A.前
B.中#
C.后
D.前中
- 水平连铸机内部夹杂物偏向铸坯()。火焰切割机的主要燃料有()。A.上面
B.下面#
C.中心位置
D.无夹杂A.乙炔、煤气、空气
B.乙炔、氮气、氧气
C.乙炔、丙烷、液化气#
- 镁砖属于()耐火材料。连铸开浇堵引锭头的主要目的是()。A.酸性
B.中性
C.碱性#A.保温
B.防止二次氧化
C.防止开浇漏钢#
D.保护引锭头
- 浇铸温度是()。结晶器内的钢水温度
中间包内的钢水温度#
到达平台的钢水温度
- 未保护浇铸时,可能产生废品()。A.内裂
B.纵裂
C.夹杂#
- 冷却结晶器水的水质是()。A.软水#
B.硬水
C.浊环水