查看所有试题
- 开关送电前进行拉合试验,其目的是()。A、检查三相是否同期;
B、检查分合闸回路是否正常;#
C、检查保护回路是否正常;
D、检查遥控操作是否正常。
- 热态启动从冲转到带上起始负荷不需要暖机,要求尽量快地操作,这是因为()。汽轮机启动过程中,减小临界转速共振损害的一般方法是()。开关送电前进行拉合试验,其目的是()。A、尽快地满足外界负荷的需要;
B、尽量
- 汽轮机热态启动的起始负荷是()。A、低负荷暖机所需要的5%~10%额定负荷;
B、启动前汽缸调节级处的金属温度所对应的汽轮机负荷;#
C、80%额定负荷;
D、零负荷。
- 汽轮机的转子以()为死点,沿轴向膨胀。A、推力盘;#
B、前轴承箱;
C、中轴承箱。
- 汽轮机启动升速过程中的供油油泵是()。汽轮机热态启动的起始负荷是()。A、高压辅助油泵;#
B、低压辅助油泵;
C、低压直流油泵;
D、主油泵。A、低负荷暖机所需要的5%~10%额定负荷;
B、启动前汽缸调节级处的
- 不同型号的汽轮机,对启动蒸汽的匹配温度要求()。A、不同;#
B、相同;
C、相似
- 轴颈产生半速涡动的因素是()。A、不平衡离心力的作用;
B、油膜失稳力的作用;#
C、轴颈转动时油膜阻力的作用;
D、转子质量分力的作用。
- 从理论上讲,发生油膜振荡的汽轮机转速等于()。A、2倍一阶临界转速;#
B、一阶临界转速;
C、涡动速度;
D、额定转速。
- 对于调节级动叶强度来讲,最危险工况是()。A、第一调节阀刚全开时的负荷;#
B、最大负荷;
C、第一调节阀刚开时的负荷;
D、去负荷。
- 汽轮机冷态启动时,汽缸外壁受到()应力。由于汽轮机启动和升负荷速度控制不当,造成汽缸法兰的内、外壁温差过大,使法兰结合面受到挤压而产生塑性变形。当汽缸内、外壁温差平稳后,在高压端法兰结合面处将产生()。A
- 喷嘴配汽式汽轮机,在1号调节阀开启过程中,调节级理想焓降是()。A、不变;
B、减小;
C、增加;#
D、难于确定
- 喷嘴配汽式汽轮机在1号调节阀全开时,可带50%额定负荷,则汽轮机调节级的最危险工况将发生在()。A、超负荷;
B、低负荷;
C、空负荷;
D、50%负荷#
- 汽轮机的转子以()为死点,沿轴向膨胀。A、推力盘;#
B、前轴承箱;
C、中轴承箱。