查看所有试题
- 关于EC的说法正确的有()CBSC在出局时才会经过EC,网内互打时不经过EC,只是手机AEC起作用;#
CBSC出局、局内都会经过EC,在局内拨打时,手机AEC和系统EC同时起作用;
RAC在出局时才会经过EC,网内互打时不经过EC,只是手
- 对于BTS3X基站的TDU单板的功能,以下说法错误的是()系统消息1的内容包括()为一个同步小区提供时钟通路
本同步小区各个机架总线的联系点
为载频板提供软件加载的路径#
提供一条CBUS3出入端口,提供告警箱的控制信号
- 射频的线性调制技术包括()QPSK#
MSK
QAM#
AM#
- 在PDCP通过后,IPMT和PDT签订合同的主要目的是()考核PDT团队计划
明确项目目标并承诺资源#
进行项目管理的依据
对于公司内部仅仅是走形式而已
- 及时获知告警信息,对告警处理和网络维护非常重要,M2000V2提供了多种告警通知的方式,以下哪些告警通知方式是默认的,不需要人工配置()在CEAS(设备档案)系统中,档案的建档单位是()基站采用+24V供电系统时,要求直
- 以下关于射频指标说法正确的是()BTS3002C光传输基站,配置网元过程,以下说法正确的是()A.发射机的相位误差和频率误差是指频率、相位的实测值与理论期望值之差B.平均发射RF载频功率是指在无线信道上的输出功率C.调
- 如果在网络信号覆盖范围内的某一特定区域,移动电话是由()基站处理,并且手机在此区域内移动时,并不需要告之网络更新位置,那么此部分区域即为一个位置区。A、一个或多个#
B、一个
C、两个
D、多个
- 关于BSC中软切换()当各搜索窗设置过大时,手机搜索速度减慢,会引起掉话、切换不成功等问题,影响网络质量。
相邻集搜索窗的设置不仅要考虑相邻导频自身的多径时延,还必须考虑相邻导频与参考导频的相对传播时延。
手
- 下面关于CDMA系统数据业务中IP地址描述错误的是()PCF的IP地址必须与CBSC/RAC的IP地址和同一个网段;
如需配置PCFGateway,则PCF的网关地址必须配置和PDSNIP地址不属于同一网段;
PCF的IP地址必须与CPPU的IP地址同一
- 手机调谐到新的频率并在相应时隙上发送切换接入突发脉冲,该切换接入脉冲仅包含()比特信息。A、5B、6C、7D、8
- 关于迁移描述正确的是()下面关于混合小区描述不正确()静态迁移都是有损的
伴随迁移都是无损的
无损迁移需要手机支持#
无损迁移在HLR设置即可A、混合小区是小区中既有900频点又有1800频点的小区,900和1800可以共
- 关于BTS3006A基站机柜内温度控制,以下说法错误的是()BTS3002C与UPS的接口主要是上报UPS告警,以下不通过该接口的告警是()每个BM模块理论上最多可提供()条64kbit/s的LAPD信令链路。温度低于-5℃时,PSU无交流电源
- TCP/IP协议通过()来区分不同的连接。为了避免在无线接口质量恶化以后,被占用的信道无法及时释放导致资源浪费,GSM协议在基站侧使用了一个用于对无线链路监控的定时器,该定时器为()下面为描述BAM专用防护工具的功
- 办事处工程师直接收到客户的重大故障类问题申告后,最长在()内必须通报至800和当地办事处技术支持经理,并立即响应客户,指导客户恢复故障。ATM中,在虚通道连接(VPC)上执行OAM功能的信息流称为()15分钟
30分钟#
6
- 目前工程师提交产品技术案例的途径有()通过NOTES的技术案例提交;
通过GCRMS系统提交;#
通过SUPPORT网站提交;#
通过工时系统提交;
- 在BSC维护系统中选择菜单[控制启动/LAPD链路维护],可查询到的状态有()TEI未分配状态#
TEI已分配状态#
多帧建立状态#
断链状态#