查看所有试题
- 单模光纤实际上传输两个()的基模。不可以用万用表测试的是()。平行
垂直
正交#
对称电压
电流
电阻
阻抗#
- BTS3012发射模式中,()模式可以增加手机的接收增益,提高信号质量。切换分析报表输出的各项统计有:()。A、发射独立
B、宽带合路
C、PBT
D、发射分集#A、切换次数#
B、切换成功次数#
C、切换失败次数#
D、成功率#
- 某基站空调的制冷量为7000W,三相电,你估计它的工作电流为()。下列哪一项()不是SUM板的操作维护功能。基站信息包括()。A、4-6安培#
B、6-8安培
C、8-10安培A、BTS各模块的软件下载、初始化、配置和重新配置
B、
- 单模光纤实际上传输两个()的基模。一个小区原配置9载频,现需要进行减容到8载频,请问在减除一块载频的同时,还应()路测概要分析报表包括()的分级定义,分段统计。EMB5116设备上可以使用的板卡是()平行
垂直
正
- 在配置为O3的MEROSITE设备里,如果主TRX1出现故障该如何处理,请选择正确的更换方法:()IU-CS接口采用ATM方式对接,基本数据配置完成后,还需要添加MNC。那么MNC的含义是()。A、直接更换新的载频到TRX1
B、先将TRX1
- 跨路警示牌悬挂在()晶体振荡器(OXCO)集成在()。对RA进行Disable操作,则该RA下的载频TRE处于()状态。VSWR代表什么意思()。覆盖估算和容量估算关联的是那个参数()。UE采用基于下行覆盖的切换方式,从3G切换
- ()链路是BSC和BTS之间维护消息所走的链路。小区切换方式中,硬切换与软切换对比来看,硬切换()EIU上的()闪烁状态代表RRU已经接入并且同步。A、LAPDOML#
B、LAPDRSL
C、SS7
D、DSS1A.硬切换资源利用率高#
B.但
- 日志数据包括:()。IU-CS接口采用ATM方式对接,基本数据配置完成后,还需要对接RNCID。那么下列参数中,不符合协议规定的RNCID是()IUB口对接过程完成了传输对接后,还需要配置IUB口局向数据和小区数据。配置小区数据
- 一个小区原配置9载频,现需要进行减容到8载频,请问在减除一块载频的同时,还应()GSM可以划分为不同的区域,根据区域的大小进行排序,正确的是:()IUB口对接过程完成了传输对接后,还需要配置IUB口局向数据和小区数据
- 水线标志牌应设置在地势高、无障碍物遮挡的地方,其牌的正面应分别与上游或下游方向成的角度;()A、20º~25º
B、25º~30º#
C、20º~30º
D、30º~35º
- 安装气缸盖时,为保证其密封性,气缸盖垫片应()。A、光面朝缸体#
B、光面朝气缸盖
C、所有孔对准
- 安装气缸盖时,为保证其密封性,气缸盖垫片应()。空调制冷时,由于()造成压缩机过热保护器动作而使电源断开。A、光面朝缸体#
B、光面朝气缸盖
C、所有孔对准A、干燥过滤堵塞#
B、室内空气温度低
C、蒸发器污垢太多
- 对RA进行Disable操作,则该RA处于()状态。对于BTS3012加载激活完DTMU软件之后,该基站()如果单板指示灯RUN灯1HZ周期性闪烁(秒闪),ALM灯常灭,表示()A、FLT
B、OPR#
C、SOS
D、FOSA、将会自动复位,然后使新软件
- 空调制冷状况是时工作压力一般为()。比较小区表和路测数据中相同CGI(MCC、MNC、LAC、CI)小区的()参数是否一致。如果这两个参数中有一个参数不一致,则小区存在异常。A、1—2KG/平方
B、4—6KG/平方#
C、1—2MPA
D
- 调节发电机励磁电流的目的是为了()。标识小区的码称为同步码SYNCDL,在下行导频时隙发射。()A、改变输出电压#
B、改变输出电流
C、改变输出频率A、DWPTS#
B、UPPTS
C、GP
D、TS0
- 柴油机的输出功率受使用环境的影响,如海拔高度。当海拔升高时,柴油机的输出功率将()空调制冷时,由于()造成压缩机过热保护器动作而使电源断开。标识小区的码称为同步码SYNCDL,在下行导频时隙发射。()EIU上的(
- IUB口对接过程完成了传输对接后,还需要配置IUB口局向数据和小区数据。配置小区数据时,需要配置LAC,SAC和,这些参数是和CN对接时使用的,影响到了小区业务的开通。()A、RAC#
B、LAC
C、SAC
D、小区功率
- 下面哪种是ULTRASITE1800EDGE载频单元()。下面那种是METROSITE基站的交流电源模块()。对于EEBTS中每一小区,TRE超过()ANC需使用电桥路测概要分析报表包括()的分级定义,分段统计。覆盖估算和容量估算关联的是
- 下面支持跳频的微蜂窝是:()在做AMR12.2Kbps语音业务时,IU口信令上查看RABASSIGNMENTREQUEST消息,检查MaximumBitRate参数,其值为()。A、MCELL-CITY
B、MICRO
C、ARENA#
D、MCELL-CITY+A、12200#
B、64000
C、384
- 下列哪个IP地址可能是TDB18AE的aCCU板卡的IP地址()联合检测是()算法的一种。A、172.27.244.17#
B、10.0.1.192#
C、10.3.0.192
D、10.10.0.192#A、单用户检测
B、多用户检测#
C、干扰抵消
D、功率控制
- 还需要配置IUB口局向数据和小区数据。配置的AAL5链路包括了NCP,CCP,ALCAP和IPOA,那么需要配置端口号的是()。TDB18AE中的GEU板卡的功能()天线的某些或全部故障,还需要配置IUB口局向数据和小区数据。配置小区数据
- IUB口对接过程完成了传输对接后,还需要配置IUB口局向数据和小区数据。配置的AAL5链路包括了NCP,CCP,ALCAP和IPOA,那么用来发送小区建立,小区建立响应的AAL5链路是()。信道板光口告警等闪烁,但一段时间后又恢复正常,
- 普通基站空调的制冷济型号是()。一个RTF需占用2M传输上几个时隙?()切换分析报表输出的各项统计有:()。在TD-SCDMA系统中,DCA的方法有哪几种()IU-CS接口采用ATM方式对接,基本数据配置完成后,还需要对接RNCID
- 整个系统中,共有()组长度为64的基本SYNCDL码。A、16
B、32#
C、64
D、128
- 制冷中,压缩机吸入的是()。下面那种是METROSITE基站的交流电源模块()。当载频出现Inhibited告警,对于载频最好的处理方法?()IUB口对接过程完成了传输对接后,还需要配置IUB口局向数据和小区数据。正常情况下,小
- 安装气缸盖时,为保证其密封性,气缸盖垫片应()。下面哪种是METROSITE基站的载频单元()。为确保网络质量,我们在维护中应确保每个模块的状态是()BTS3012中()单板可以给塔放提供电源。()为切换的需要,RNC之间
- 下面那种是METROSITE基站的交流电源模块()。每个BTS都有两路分集接收,以下说法不正确的是:()A、PSUA
B、PWSB
C、HVSD#
D、CSUAA、增加接收增益,提高基站接收灵敏度,提高接收信号质量
B、增加覆盖范围
C、增加系
- 空调制冷时,由于()造成压缩机过热保护器动作而使电源断开。()链路是TRX和BSC之间信令消息所走的通路。A、干燥过滤堵塞#
B、室内空气温度低
C、蒸发器污垢太多
D、风扇电动机转速太高A、LAPDOML
B、LAPDRSL#
C、S
- BBU和RRU之间通常使用的2.5G光模块是()KM的,如果两者之间距离超过该距离,需要更换为()KM的光模块。调节发电机励磁电流的目的是为了()。内燃机是将液体或固态燃料()的的装置。制冷剂不足的现象特征()。下面
- ()由俯仰液压系统、俯仰液压油缸平衡阀装置及其管路,外加变幅信号发生器等组成。联合检测是()算法的一种。IUB口对接过程完成了传输对接后,还需要配置IUB口局向数据和小区数据。正常情况下,小区和公共信道可以正
- 如果单板指示灯RUN灯1HZ周期性闪烁(秒闪),ALM灯常灭,表示()ALCATEL设备ANC功能是()。IUB口传输不通,如果使用的E1传输,要在基站机房进行打线,那么基站的传输E1一般先接到,然后再连接到RNC。()单板正常运行中#
- 在ZXTRB30系统中一块TTRX可以支持多少根天线阵子()DBS3900设备RRU模块VSWRTXACT指示灯红色慢闪(1s亮,1s灭)表示:()一个BIIA单板可以支持的E1数量是:()A、2根
B、4根#
C、6根
D、8根A、单板正常运行
B、ANTT
- 智能天线与RRU之间的RF信号线,每个扇区包括:()根校准信号线,()根工作射频信号馈线。油机发电机组的交流输出整定电压是在()情况下调整的。水线标志牌应设置在地势高、无障碍物遮挡的地方,其牌的正面应分别与上
- 一个BIIA单板可以支持的E1数量是:()某基站空调的制冷量为7000W,三相电,你估计它的工作电流为()。普通基站空调的制冷济型号是()。一个O3配置的ULTRASITE基站至少需要几块BB2x。()GPS由于开路导致无法锁定的
- 如果需要出E1接口,RIBP应该用什么物理单板实现()?国际久保ATH3135汽油机的输出有功功率为()KW。请将话音信号在无线接口路径的处理过程按顺序排列:()APBE
IMAB#
VTCD
MNICA、7
B、8#
C、9
D、10A、语音→话音
- 一块IMAB板和块DTB单板在一起使用,才能完成RNC和Node B之间的传输功能()润滑系统旁通阀的作用是()。OML是操作维护链路,根据ABIS时隙复用方式的不同,OML可以是2M电路中的一个时隙,也可以与RSL共用一个时隙,请问OM
- 下面哪个原因不会导致小区退服。()BBU与RRU通信链路断
下行驻波比故障#
UPBI单板故障
光口故障
- 不可以用万用表测试的是()。空调器中,风冷式冷凝器的结构为铜管上套上铝质薄片(俗称翅片或肋片),加肋片的目的是()。一台工作电压为220V的分体式空调机,当接上380V的电源后,受到损坏的是。()每个BTS都有两路
- ()板提供以太网端口和交换单元的二级交换子系统连接,完成对PS业务协议的处理。标石编号为白底蓝漆正楷字,字体端正,表面整洁。编号应根据传输方向,自A端向B端方向编排。一般以为独立编号单位。()一台工作电压为22
- 在ZXTRB30系统中,下列哪块单板是需要热备份的()四冲程柴油机飞轮刻度为0度时()。一个小区原配置9载频,现需要进行减容到8载频,请问在减除一块载频的同时,还应()IU-CS接口采用ATM方式对接,基本数据配置完成后,还