查看所有试题
- 正火和退火工艺的主要区别是()不同。按渗碳体的形态,珠光体分为()。冷却速度#
升温时间
保温时间片状珠光体#
球状珠光体#
索氏体
托氏体
- 溴化钾在显影液中的作用是()。一次渗碳体是从()中析出的。压力加工铝合金中新型的高强度合金是()。贝氏体转变特点()。实际金属强化的机制有()。使未感光的银盐在显影过程中不起变化,以防止底片发生雾翳#
- 印相的步骤顺序是()视场光阑的主要作用是()。目前,常用的浸蚀低倍组织的试剂为()。晶粒越细小,构成材料的晶粒个数越多,则()。感光——显影——定影——水洗——上光#
定影——显影——感光——上光
感光——定影——显影——上光
- 相变是指()之间的转变过程。奥氏体和渗碳体的机械混合物是()。同素异构转变与液态结晶的不同之处()。实际金属强化的机制有()。面缺陷包括()。解理断裂的特征是()。根据钢的组织特点,可将热强钢分为()
- 国家标准中规定对于非金属夹杂物检验的放大倍数为()。奥氏体和渗碳体的机械混合物是()。面缺陷包括()。马氏体不锈钢的最终热处理是()50
100#
500
1000莱氏体#
珠光体
共晶渗碳体A.刃型位错B.螺型位错C.晶界D
- 普通黄铜(即铜锌合金)中,当锌含量小于30%时,其显微组织是()。金属按其性质、特点通常分为()α相#
α相+β相
β相有色金属#
黑色金属#
无色金属
重金属
- 机械构件静载断口中心纤维区为典型的()。正火和退火工艺的主要区别是()不同。铸铁的石墨型态有()。脆性断裂
塑性断裂#
疲劳断裂冷却速度#
升温时间
保温时间片状#
球状#
蠕虫状#
花状
- 一次渗碳体是从()中析出的。材料中的空洞、夹杂物等原子偏离周期排列的三位缺陷通常被称为()。与片状珠光体相比,在成份相同的情况下,()铁碳相图中E点的含义包括()。实际金属强化的机制有()。低倍检验分为
- 视场光阑的主要作用是()。HRC的测量范围是()。含碳量1.2%的钢,当加热至AC1~ACm时,其组织应是()。钢中常见非金属夹杂物()。同素异构转变与液态结晶的不同之处()。点缺陷包括()。非金属夹杂按夹杂物的形态
- 对于黑色金属,布氏硬试验力保持时间是()。钢中含洛量为13%~19%,含碳量为0.1%~0.45%,则称该钢为()。照片过于灰黑,其原因有()。关于渗碳体说法正确的是()。5~10秒
10~15秒#
15~20秒
20~25秒铁素体型不锈钢
- 低合金钢按()分为普通质量低合金钢和优质低合金钢以及.特殊质量低合金钢。马氏体转变温度Mf的含义是()当非金属原子的半径与过渡族原子半径之比()时,其结构很复杂,通常称为间隙化合物。主要质量等级#
化学成分
- 铁碳相图中共析转变的产物,叫做()。高速钢和Cr12型模具钢测定碳化物不均匀性应在()状态下进行。压力加工铝合金中新型的高强度合金是()。关于共晶转变说法正确的是()。奥氏体
铁素体
莱氏体
珠光体#正常淬火,
- 各相同性非金属夹杂物,在正交偏振光下观察,旋转载物台时,其光示特征为()影响马氏体硬度的主要因素是()。纯铁在700℃时具有的晶格类型是()。金属按其性质、特点通常分为()明暗没有变化#
发生四次明暗变化
发生
- 哪些金属属于有色金属()。A.锌B.碳C.金D.铁#
- 马氏体转变时,晶体结构的改组是依靠()进行的。关于铁素体说法正确的是()。钢中常见非金属夹杂物()。滑移方式
切变形式#
扩散方式γ–Fe中融入溶质元素形成的固溶体
属于固溶体#
保持体心立方晶格#
强度、硬度不
- 钢中()杂质元素导致钢的热脆性。对于金相组织检验,试样尺寸以磨面面积小于()为宜。纯铁在700℃时具有的晶格类型是()。P
S#
H
O100m㎡
200m㎡
300m㎡
400m㎡#体心立方晶格#
面心立方晶格
密排六方晶格
- 钢中()杂质元素导致钢的热脆性。屈氏体在光学显微镜下高倍放大看()。冷塑性变形对金属显微组织有较大影响,下面描述正确的有()不锈钢按组织成份可分为()P
S#
H
O分辨不出其内部构造;只看到总体是一团黑#
可
- 淬火钢在()°C回火时,晶粒长大,球状Fe3C粗化。屈氏体与珠光体相比,其()。与片状珠光体相比,在成份相同的情况下,()渗碳层深度:最常用的方法是将淬火态的钢材用锤击法一次打断,并将断口磨平,在()中的腐蚀30s左
- ()钢的拉伸曲线的屈服阶段呈锯齿状,有上、下屈服点。铸铁
淬火后低、中温回火
中碳调质钢
退火低碳钢#
- 奥氏体起始晶粒度总是()奥氏体实际晶粒度。晶向指数是晶体中表示所有相互()方向一致的晶向。铁碳相图中共析转变的产物,叫做()。相等
大于
小于#垂直
平行#
垂直或平行
异面奥氏体
铁素体
莱氏体
珠光体#
- 印相的步骤顺序是()在正常加热情况下,随着含量的增加亚共析纲的C.曲线()。根据夹杂物的形态分类,可将其分()。在铁碳相图中,关于共析转变说法正确的是()。感光——显影——定影——水洗——上光#
定影——显影——感光——
- 印相的步骤顺序是()金属中具有相同的化学成分、相同的结构和相同的物理性能的组织称为()。下列属于铁素体型不锈钢的有()感光——显影——定影——水洗——上光#
定影——显影——感光——上光
感光——定影——显影——上光组织
组
- 奥氏体起始晶粒度总是()奥氏体实际晶粒度。根据夹杂物的形态分类,可将其分()。关于面心立方晶格说法正确的是()。相等
大于
小于#硫化物#
氧化铝#
硅酸盐#
球状氧化物#
颗粒球状原子数为2
原子半径为1/4A
配位