查看所有试题
- 经计量后的聚丙烯粉末通过()进入挤压机内。丙烯脱砷塔的吹扫置换使用()。下列是聚合物特有的力学行为的是()。A、风送管线
B、加料料斗#
C、离合器
D、开车阀A、热空气
B、空气
C、热氮气
D、氮气#A、玻璃态#
B
- 达不到机泵完好标准的是()。三乙基铝钢瓶到贮罐的压料操作完毕后应()。生产过程中产生大颗粒同时伴随着小颗粒的现象时,应检查()。A、润滑油杯,轴承箱,油窗齐全完好
B、靠背轮防护罩缺螺丝#
C、盘车自如
D、电
- 下列是聚合物特有的力学行为的是()。挤压机辅助系统的开车包括()。三乙基铝钢瓶到贮罐的压料操作有()。A、玻璃态#
B、熔融态
C、高弹态#
D、粘流态#A、加热系统的开车#
B、筒体水系统的开车#
C、润滑油系统的
- 循环丙烯洗涤塔停车过程中,丙烯冷凝器液位达到()可停止循环泵。下列选项中,不属于机泵的完好标准的有()。回收丙烯压缩机的启动操作是()。A、10%#
B、50%
C、60%
D、70%A、主体整洁
B、轴承油箱窗喷漆盖住#
C、
- 配制油脂时的顺序是()。装置开工引丙烯进料前,装置应具备的条件是()。原料丙烯纯度分析时,下列()是必须测定的。A、先加2桶油再加1桶脂
B、先加2桶脂再加1桶油
C、先加1桶油再加1桶脂再加1桶油#
D、先加半桶油
- 污水排污泵电机绝缘为零的主要原因是()。静电接地的连接方式采用电池夹头,鳄式夹钳等器具连接时,铜芯软绞线的横截面积应不小于()mm。在进行静电接地时,应注意()部位的接地。A、出口压力高
B、流量大
C、机封泄
- 下列情况下,安全阀应该停止使用并更换的是()。挤压机日常巡检项目有()。当预聚合反应器夹套水循环泵停车后,反应器温度持续上涨,应进行的操作有()。A、安全阀的阀芯和阀座密封不严且无法修复
B、安全阀选型错误
- 系统吹扫时,对于大容积、小于Dg500的大管径的管线,广泛采用()吹扫,以减少空气用量和吹扫时间。环管反应器轴流泵启动前必须要确认()。循环丙烯洗涤塔的开车过程中排放不凝气部位()。A、爆破法#
B、高压空气
C、
- 关于化学键的描述,下列说法错误的是()。循环丙烯洗涤塔停车过程中,塔底部控制阀一直保持一定开度的目的是()。当给电子体中断,应进行的操作是()。A、化学键是相邻原子之间的吸引作用
B、离子键、共价键、金属键
- 下列物质中,属于极性化合物的是()。蜗壳离心泵在设计流量下工作时,叶轮周围的速度、压力均匀,作用在叶轮上的径向合力()。丙烯脱硫塔的吹扫置换使用()。A、NaO2
B、H2S#
C、Cl2
D、FeA、等于0#
B、大于0
C、不
- 下列物质中,可以作为齐格勒-纳塔引发体系的主引发剂是()。牛顿粘性定律的应用条件是()。在对料仓进行掺混操作时风机压力升高的原因是()。A、氯
B、钛#
C、氧
D、镁A、流体处于层流#
B、流体的粘度小于一定值
C
- 蒸汽系统流量计一般采用()流量计。金属静电接地板的截面积不宜小于()。氢气在聚合反应中的重要作用是()。A、孔板#
B、质量
C、阿牛巴
D、涡街A、30mm;10mm
B、50mm;20mm
C、50mm;10mm#
D、30mm;20mmA、调
- 不是制冷系统管线保冷的作用为()。氢气压缩机的停车步骤是()。下列选项中,能够造成成品风送管线堵塞的原因是()。A、减少冷量损失
B、防止冻伤操作人员
C、防止空气中的水蒸气凝结
D、减少热损失#A、停压缩机#
- 尾气压缩机使用循环水的危害主要是()。下列选项中,属于化学键的是()。装置气密的原则为()。A、污染环境
B、浪费水资源
C、形成水垢,减弱设备散热效果#
D、直接增加设备停车次数A、离子键#
B、共价键#
C、金属
- 把60g质量分数为5%的NaCl溶液提高到10%,可用的方法是()。闪蒸罐投用前需要确认的条件有()。根据管材的不同,从腐蚀外观判定有()腐蚀。A、加入3gNaCl
B、蒸发掉30g水#
C、蒸发掉28.5g水
D、加入10gNaClA、排放系
- 系统吹扫时,对于大容积、小于Dg500的大管径的管线,广泛采用()吹扫,以减少空气用量和吹扫时间。挤压机日常巡检项目有()。当三乙基铝中断15分钟后,可进行的主要操作是()。A、爆破法#
B、高压空气
C、低压空气
D