查看所有试题
- GCrl5钢平均含铬量为()%。奥氏体等温转变图可以被用来估计钢的淬透性大小和选择适当的()介质。去心力退火时()发生组织转变。A、0、15
B、1、5#
C、15A、淬火#
B、回火
C、正火A、会#
B、不会
C、不一定
- 为使低碳钢便于切削加工,应采用()热处理。硫和磷都是钢中的有(),硫能导致钢的冷脆性,而磷能导致钢的热脆性。A、完全退火
B、球化退火
C、正火#A、有害杂质#
B、无害杂质
C、有害有有益
- 过冷奥氏体在低于Ms时,将发生()转变。这种转变虽有孕育期,但转变速度极快,转变量随温度降低而增加,直到Mf点才停止转变。要将奥氏体冷却到Ms点以下,奥氏体便会转变成马()。A、奥氏体
B、渗碳体
C、马氏体#A、奥氏
- 40MnVB中硼元素的只要做作用是()。等温转变可以获得()连续冷却可以获得()A、强化铁素体
B、提高回火稳定性
C、提高淬透性#A、马氏体、贝氏体#
B、奥氏体、贝氏体
C、贝氏体、马氏体
- Q235-A.F表示抗拉强度为235Mpa的()沸腾钢。A、C级
B、B级
C、A级#
- Q235-A.F表示抗拉强度为235Mpa的()沸腾钢。A、C级
B、B级
C、A级#
- 一般清况下碳钢()用油,合金铜淬火用水。A、淬火#
B、回火
C、正火
- Q235-A.F表示抗拉强度为235Mpa的()沸腾钢。A、C级
B、B级
C、A级#
- 由于多晶体是(),符合晶体的力学特征,所以它具各异性。碳素钢的不足之处不包括()。去心力退火时()发生组织转变。A、晶粒
B、晶体#
C、晶界A、淬透性好#
B、回火稳定定性差
C、综合机械性能低A、会#
B、不会
C、
- 除Fe和C外()其他元素的钢就是合金钢。以镍为主要合金元素的铜合金称为()。精确的临界冷却速度1i但能从奥氏体连续冷却转变图上得到,也可从奥氏体()转变图上得到。A、有#
B、没有A、黄铜
B、白铜#
C、青铜A、不
- 钢的热硬性是指钢在高温下保持()的能力。精确的临界冷却速度1i但能从奥氏体连续冷却转变图上得到,也可从奥氏体()转变图上得到。A、高强度
B、高硬度和高耐磨性#
C、高抗氧化A、不确定
B、不等温
C、等温#
- 除Fe和C外()其他元素的钢就是合金钢。同一化学成分的情况下,铸铁结晶时的冷却速度对石墨化程度影响很()。冷却速度越快,越有利于石墨化。下列不是合金钢按用途分的是()。A、有#
B、没有A、中
B、大#
C、小A、高
- 以镍为主要合金元素的铜合金称为()。硬质合金的热硬性和高速钢()。去心力退火时()发生组织转变。A、黄铜
B、白铜#
C、青铜A、不一定
B、不同
C、相当#A、会#
B、不会
C、不一定
- 低合金高强度钢加入的主要合金元素有Mn、Si、V、Nb和Ti等,它们大多小能在热轧或()状态下使用,一般要进行热处理后方可使用。一般清况下碳钢()用油,合金铜淬火用水。A、正火#
B、退火
C、回火A、淬火#
B、回火
C、
- 马氏体的硬度主要取决于()。A、淬火加热温度
B、马氏体中含碳景#
C、淬火冷却速度
- 38CrMoAl钢是属于()。下列不是合金钢按用途分的是()。硬质合金虽然硬度很(),而且很脆,但仍可以进行机械加工。A、调制钢#
B、渗碳钢
C、弹簧钢A、高合金钢#
B合金结构钢
C、合金工具钢A、中
B、高#
C、低
- 一般清况下碳钢()用油,合金铜淬火用水。A、淬火#
B、回火
C、正火
- 合金渗碳钢渗碳后必须进行()热处理才能使用。A.淬火+低温回火B.淬火+中温回火C.淬火+高温回火D.完全退火#
- 金属和合金中的()缺陷使得力学性能变坏,故必须加以消除。以镍为主要合金元素的铜合金称为()。A、原子
B、分子
C、晶体#A、黄铜
B、白铜#
C、青铜
- 等温转变可以获得(),连续冷却可以获得()。为使低碳钢便于切削加工,应采用()热处理。A、马氏体、贝氏体#
B、贝氏体、渗碳体
C、渗碳体、贝氏体A、完全退火
B、球化退火
C、正火#
- 下列不是合金钢按用途分的是()。A、高合金钢#
B合金结构钢
C、合金工具钢