查看所有试题
- 进行流量仪表的流量标定,在水流量标定系统的组成中,一个重要的部位是高位水槽,用高位水槽来产生(),以保证流量的稳定。块料应采用()料位开关测量。A、标准容积
B、恒水源
C、恒压头水源#
D、恒压头A、电容式
B、
- 一台具有开方功能的EJA110变送器测流量,对应的最大流量为16t/h,当差压为10kPa时,变送器的输出电流及对应的流量为()。外夹式超声波流量计在测量前,为了计算超声波的传播长度,需要设置()12mADC,8t/h#
8mADC,4t/h
8
- 下列关于阀门定位器作用的描述,不正确的是()。和介质不接触的物位计有()改变阀门流量特性
改变介质流动方向#
实现分程控制
使阀门动作反向A、超声波物位计#
B、雷达物位计#
C、激光物位计#
D、核辐射物位计#
- 均速管流量计的测量原理是,装在管道中心的一根带有小孔的金属管,末端正对着流体流向,以测流体的全压力,全压力就是()。对测量仪器的控制包括()A、动压力与静压力之差
B、动压力与静压力之和#
C、动压力加上静压差
- 阀门定位器一般由凸轮、量程、零位等组件构成,其中能改变阀门的行程特性的组件是()。A、凸轮;#
B、量程组件;
C、零位组件
- 某容器内压力为1MPa,为测量它,应选用量程为()的工业压力表。锅炉汽包水位控制的扰动量有()0~1MPa
0~1.6MPa#
0~2.5MPa#
0~4.0MPaA、给水压力#
B、给水温度#
C、蒸汽压力#
D、蒸汽流量#
- X射线是介于()和γ射线之间。初步设计内容包括()A、红外线
B、可见光
C、紫外线#
D、β射线确定工艺生产的自动化水平#
对重要的控制系统作出详细说明#
提出自控仪表设备和相关的电气设备及主要安装材料规格数量#
- 一般流量控制回路,采用()控制器。按照什么方式,变量可分为“简单型变量”和“功能块实例”:()A、PID
B、P
C、PD
D、PI#A、按照变量结构形式的不同#
B、按照变量有效范围的不同
C、按照属性划分
D、按照变量能否掉电
- 在现场控制站DP通讯链路中哪种硬件需要分配站地址号:()ERP系统是借助于先进信息技术,以财务为核心,集()为一体(称三流合一),支撑企业精细化管理和规范化动作的管理信息系统。A、热电偶冷端补偿模块
B、终端匹
- 控制系统的过渡过程有()形式。国际单位制的特点有()发散振荡、衰减振荡和等幅振荡
发散振荡、衰减振荡和收敛振荡
发散振荡、衰减振荡、收敛振荡和等幅振荡
发散振荡、衰减振荡、单调过程和等幅振荡#A、统一性#
B
- 通过转子流量计有关参数计算,可以看到:当转子材料密度减小(小于标定介质的密度),其余条件(转子形状、被测介质密度等)不变时,则仪表换算后量程()。A、增大#
B、减小
C、不变
D、不稳定
- 外夹式超声波流量计在测量前,为了计算管道流通截面积,需要设置()色谱仪的基线不稳的原因有()A、管道外径#
B、管道厚度#
C、衬里厚度#
D、管道材质
E、衬里材质
F、流体名称
G、流体粘度
H、换能器安装方式A、检
- Profibus数据链路层识别两种设备类型是()。热电偶热电势的大小与下列哪些因素有关?()A、主设备、从设备#
B、基本设备,从设备
C、主设备、网桥
D、链路设备、从设备A、热电偶的材料#
B、热电偶的粗细
C、热电偶
- 以下不属于报表组态中的动态点的是:()外夹式超声波流量计在测量前,为了计算超声波的传播速度,需要设置()A、历史点
B、实时点
C、时间点
D、触发点#A、管道外径
B、管道厚度
C、衬里厚度
D、管道材质#
E、衬里材
- 前馈调节是根据扰动量来进行的调节,通常产生静态偏差,需要由()回路克服。扰动量
负反馈#
正反馈
干扰
- 一台气动薄膜调节阀,若阀杆在全行程的50%位置,则流过阀的流量大于最大的50%的有()类型的阀。A、快开#
B、等百分比
C、线性
D、抛物线#
- 如果电气阀门定位器的信号正、负接反,则()。控制器常用的控制规律有(),以及它们的组合控制规律,例P1.PD.PID等。定位器无输出或跑零下#
输出为0.02MPa
输出波动
输出为零位式控制#
比例控制(P)#
积分控制(I)#
- 用孔板流量计测量蒸汽流量设计时蒸汽密度为4.0kg/m3,而实际工作时的密度为3.0kg/m3,则实际指示流量是设计流量的()倍。初步设计内容包括()A、0.896
B、0.866#
C、1.155
D、1.100确定工艺生产的自动化水平#
对重要
- 下列网络为TPS系统中网络类型有()A、PCN#
B、TPN#
C、UCN#
D、DataHiway#
- 对可调比来说,切断阀比旁路阀的影响要()。A、大
B、小#
C、好
D、差
- 对流量特性来说,切断阀比旁路阀的影响要()。联锁系统采用的电磁阀采用()。A、大
B、小
C、好
D、差#A、通电状态工作#
B、断电状态工作
C、任意
D、根据条件
- 测量管道中某一直径上几个点的平均速度的流量计是()。A、均速管流量计#
B、皮托管流量计
C、时差单声道超声波流量计
D、插入式涡轮流量计
E、孔板流量计
F、涡轮流量计
G、插入式电磁流量计
H、电磁流量计
- 如作精确测量,因而必须单独进行标定的有()国际仪表和控制系统明显趋势是向()方向发展。标准孔板
标准喷嘴
文丘里管
1/4圆喷嘴#
双重孔板#
圆缺孔板#数字化#
智能化#
小型化
网络化#
- 以下不属于报表组态中的动态点的是:()A、历史点
B、实时点
C、时间点
D、触发点#