查看所有试题
- 下列是回火的目的是()马氏体的硬度主要取决于()。A、得到马氏体或贝氏体
B、稳定工件尺寸#
C、提高钢的强度和耐磨度
D、提高钢的塑性马氏体的含碳量#
马氏体含合金元素量
冷却速度
奥氏体的晶粒度
- 20Cr为()原始组织为片层状珠光体加二次渗碳体的过共析钢在球化退火时,使()发生了球化而获得球状珠光体。A、调质合金钢
B、中淬透性钢
C、高淬透性钢
D、低淬透性渗碳港#二次渗碳体
二次渗碳体及铁素体
二次渗碳
- 锡青铜与黄铜比()造船用的碳素钢属于()A、铸造性差#
B、铸造性好
C、耐磨性差
D、耐蚀性差A、普通质量碳素钢
B、优质碳素钢#
C、特殊质量碳素钢
D、以上都不是
- 若回火产物是在α相(铁素体)基体中分布着微小的粒状碳化物,α相已经回复,但尚未再结晶,故仍具有马氏体的针状特征,这种组织称()。回火马氏体#
回火屈氏体
回火索氏体
- 玻璃钢是()在我国低合金高强度钢主要加入的元素为()A、复合材料#
B、塑料
C、一种钢
D、陶瓷A、锰#
B、硅
C、钛
D、铬
- 在常用的表面热处理方式中,()处理变形最小。感应加热表面淬火
渗碳
氮化#
- 塑料的主要成分()A、稳定剂
B、填充剂
C、增强剂
D、树脂#
- 工作中有强烈摩擦并承受冲击载荷或交变载荷的零件广泛应用的热处理方法()A、渗碳
B、渗氮#
C、调质
D、淬火
- 过共析钢加热到A1~Acm之间时,()。奥氏体的含碳量小于钢的含碳量#
奥氏体的含碳量大于钢的含碳量
奥氏体的含碳量等于钢的含碳量
- 质量一定的奥氏体转变为马氏体,其体积()。胀大#
缩小
不变
- 球化退火前有网状渗碳体的钢件,在球化退火前先进行()A、退火
B、正火#
C、淬火
D、回火
- 活塞环、气缸套等一般采用()碳素工具钢在使用前()A、灰铸铁
B、可锻铸铁
C、蠕墨铸铁#
D、球墨铸铁A、要进行热处理
B、不需要热处理
C、有的需要有的不需要#
D、以上都不对
- 钢的()直接影响钢的性能。实际晶粒度#
起始晶粒度
本质晶粒度
- 可锻铸铁中,石墨的存在形式是()理论上,恐怖分子制造的"9·11"事件是由下列哪种风险因素造成的?()淬火钢回火后的硬度主要取决于()。A、粗大片状
B、团絮状#
C、球状
D、蠕虫状人为因素
道德风险因素#
心理风险
- 下列是整体热处理的是()A、正火#
B、表面淬火
C、渗氮
D、碳氮共渗
- 最常用的淬火冷却介质是清水、盐水和油,其冷却能力大小依次为()。关于CCT曲线,错误的说法是()。V清水>V盐水>V油
V盐水>V清水>V油#
V油>V清水>V盐水
V油>V盐水>V清水从CCT曲线可以获得钢
- 黄铜主要合金元素为()A、锡
B、锌#
C、镍
D、硅
- 合金钢要充分显示出良好的特性,必须进行()A、渗氮
B、渗碳
C、加工硬化
D、热处理#