查看所有试题
- 屋面防水等级为Ⅳ级的建筑物,防水层使用年限的要求为()。为保证室内采光的要求,一般单侧采光时房间进深不大于窗上口至地面距离的2倍。双侧采光时进深可较单侧采光时增大()倍。A.25年B.15年C.10年D.5年1#
2
1.5
3
- 混合砂浆中加入的石膏所起的作用是()材料管理控制应包括()、使用管理及不合格品处置等。增加光感
早强
缓凝#
节约材料材料供应单位的选择#
教育培训和考核
订立采购供应合同#
出厂或进场验收#
储存管理#
- 楼板层通常由什么组成()?面层、楼板、地坪
面层、楼板、顶棚#
支撑、楼板、顶棚
垫层、梁、楼板
- 门窗表和门窗总表比较()A, B, C, D
- ()是一切形式美的基本规律。注:①对比②统一③虚实④变化建筑物按建筑结构材料分()A.①②B.①③C.②D.②④砖木结构#
砖混结构#
钢筋砼结构#
钢结构#
- 以下哪项不是建筑体型的联系与交接方式?()单注标高通常用在()标注直线连接
曲线连接#
咬接
以走廊或连接体连接立面图
剖面图
大样图
平面图#
- 下列关于屋面排水方式错误的是().多脊双坡屋面排水方式多用于单层工业厂房。
缓长坡屋面排水方式相较于多脊双坡屋面排水方式构造更简化。
缓长坡屋面的内天沟排水多用内落式。#
缓长坡屋面多用于要求排水防水可靠
- 由砖石等砌块砌筑成柱子,钢筋混凝土屋架、钢屋架等组成的厂房结构为()。建筑施工的特点包括()砌体结构#
轻钢结构
混凝土结构
重钢结构施工的流动性#
施工的工艺性
施工的复杂性#
施工的个别性#
施工的工期长#
- 下列各组尺寸中,最有可能是楼梯栏杆与阳台栏杆高度的是()。600mm、900mm
900mm、1200mm#
1100mm、900mm
1000mm、1000mm
- 屋面防水中泛水高度最小值为()对构造柱组合墙的叙述中()是符合要求的。砼和钢筋二者之间()A.150B.200C.250D.300先浇砼柱后砌墙
先砌墙后浇砼柱#
柱截面不宜小于240×240,柱厚度不应小于墙厚#
柱间距不宣大于4m#
- 门窗的安装方法有()A.先立口B.后立口C.先空口D.以上均不对#
- 防水材料接缝越多,造成渗漏的可能性越()小
不可能
大#
无关
- ()的基数为3M与6M,其相应尺寸为300mm、600mm。泛水系屋面防水层与垂直墙交接处的防水处理,其高度应不小于()D。一般开间或进深的数值都是以()MM为级数的水平扩大模数
竖向扩大模数#
水平基本模数
竖向基本模数1
- 单层工业厂房砖墙高度超过()m时,须在适当位置设置连系梁。现浇式钢筋混凝土楼板有如下()形式。5
15#
20
12平板式楼板、肋梁楼板,井式楼板、无梁楼板
平板式楼板、肋梁楼板,井式楼板、组合楼板
平板式楼板、肋梁
- 建筑产品的固定性决定了建筑施工的()在CAD中画墙体一般用()画较多流动性#
交叉性
灵活性
一致性直线
多线#
构造线
射线
- 在散水表面上见到的一条条缝隙是()沉降缝
温度缝#
施工缝
防震缝
- 在面积定额指标中.所谓户均使用面积是指()正交和极轴二者可以是()A.有效总面积与总户数之比
B.建筑总面积与总户数之比
C.居住总面积与总户数之比
D.使用总面积与总户数之比#同时打开
同时关闭
不能同时打开
- 造成卷材屋面开裂的原因主要有()。檐沟的构造形式有()等民用住宅中常见的楼梯是()楼梯A.温度变形B.翘曲变形C.结构变形D.卷材易老化、拉裂#A.自由落水檐沟B.挑檐沟C.女儿墙内檐沟外排水D.女儿墙带檐沟#直跑
双
- 高层建筑一般采用()排水方式。无组织排水
有组织外排水
有组织内排水#
自由落水