查看所有试题
- 一个良好的电视系统应该有20-40dB。正确#
错误
- 我国规定测量随机杂波需要加9KHz的高通滤器和6MHz的底通滤器。正确#
错误
- 反射损耗是衡量电视设备终端阻抗匹配程度的一项重要招标。总控系统的作用()。正确#
错误A、完成对各路信号的切换B、对外来信号进行加工C、对输#
出信号进行场逆程信号的插入#
D、建设全台的统一同步脉冲、时间和频
- 视频切换器应具备的三个基本功能:混合、切换和输出。正确#
错误
- 实现自动播出的前提是节目定时栏目化。正确#
错误
- 行同步信号宽度为(3.7us),周期为(64us)。正确#
错误
- 主控室及总控,是电视中心内、外信号汇集的中枢。正确#
错误
- 视频处理放大器主要有视频处理放大单元,同步再生发生器和色同步控制振荡器三大部分组成。人的耳朵所能分辨的频率范围是()。正确#
错误200Hz~3.4kHz
50Hz~7kHz
20Hz~15kHz#
10Hz~20kHz
- 参与特技切换的各路信号必须符合“三统一”,“三统一”指的是()。A、时间统一#
B、相位统一#
C、幅度统一#
- 电视播控系统由摄像机、同步机、视频切换器、特技信号发生器、视频分配器、监视器和手动或自动播出等设备组成。正确#
错误
- 数字视频信号编码主要有()。一般来说,表示声音的质量越高,则()。A、复合编码#
B、分量编码#
C、脉冲编码A、量化位数越多和采样频率越低
B、量化位数越少和采样频率越低
C、量化位数越多和采样频率越高#
D、量化
- 总控系统的作用()。A、完成对各路信号的切换B、对外来信号进行加工C、对输#
出信号进行场逆程信号的插入#
D、建设全台的统一同步脉冲、时间和频率标准#
E、设有监测系统和通话系统#
F、对微波机房、市内转播用微波
- 测量反射损耗的方法()。A、延时电缆法#
B、反射损耗电桥法#
C、用2T脉冲信号#
- 节目播出控制室主要作用是()。第四媒体是指()。A、完成节目播出的实时控制,即按节目表的时间顺序,逐一将节目播出去#
B、在播出图像上插入字幕#
C、插入紧急新闻#A、广播
B、报纸
C、网络#
D、电视
- 通常有三种方式形成键控的门脉冲()。A、键控
B、自键#
C、外键#
D、色键#
- 视频切换的主要方式有()。方向控制回路是()。A、快切#
B、慢转换特技切换#
C、分画面特技功能#换向回路#
闭锁回路#
节流回路
卸载回路
- 实行自动播出必须做到以下几点()。A、实现节目播出的定时栏目化#
B、合理的工艺流程,准确的时间计量#
C、统一的计划管理#
D、明确职责,分工合作,严格规章制度#
E、建立必要的统一标准#
- 电视功率放大器为兼顾效率和线性的要求,一般采用()工作方式。甲乙类
- 一段同轴电缆,其内导体外径为1.37mm,外导体内径为4.60mm,其内外导体之间介质的,试判断其特征阻抗为()欧姆。50
- 调幅信号的检波方式主要有()和()两种。峰值检波;同步检波
- GY-36-84《VHF电视发射通道运行技术指标》中规定图像发射通道微分增益甲级指标是(),微分相位甲级指标是()。±5%;±5°
- 发送系统中,由于电路的非线性,会产生微分增益失真和微分相位失真,表现在画面上前者会引起()失真,后者会引起()失真。色饱和度;色调
- 在电视发射机中,为了解决图像已调波信号占用频带过宽而容纳节目套数减少之间的矛盾,图像信号采用()发送,由此会带来严重的群时延失真,需要采用专门的电路进行校正。复用技术有多种,模拟通信常用()。残余边带调幅
- 按照电视发射机中用于功放的主要器件分类,世界上大致有以下几种主要类型的发射机:()、()、()、()。电子管;速调管;IOT管;全固态
- 卫星电视C频段的频率范围是()GHz。3.7~4.2
- 模拟电视发射机在送全黑电视信号调制时,其标称功率是平均功率的()倍。1.68
- 功率放大器的增益用dB表示指放大器的输入功率和输出功率之比的对数关系,电子管FC-732放大器的增益约为13dB,则它的输出功率是输入功率的()倍。20
- 在微带功放中,当需要微带线特性阻抗变大时,应将微带线的宽度变(),而微带线的带内波长λg将会因此变()。第四媒体是指()。窄;长A、广播
B、报纸
C、网络#
D、电视
- 已知一个五单元的定向天线,它的折合振子长度为70cm,试计算求出天线所接收主要信号频道的中心频率是()MHz,它是()频道。187;8
- A/D转换过程包括()、()和()。IP地址类别前缀为110时,其地址类别为()类。取样;量化;编码D
C#
B#
A
- 电视15频道的频率范围为()MHz,其图像载频频率为()MHz,伴音载频频率为(),变频器的本振频率为()MHz,晶振频率为()MHz。参与特技切换的各路信号必须符合“三统一”,“三统一”指的是()。486-494;487.25;493.75
- 若将全电视信号分为图像信号、消隐信号、同步信号,对于负极性信号来说,电平最高的是(),其次是(),电平最低的是()。SDH的帧结构是以字节为基础的,一个字节是()。同步信号;消隐信号;图像信号2比特
4比特
6比
- 长距离光纤传输选用多模光纤。正确#
错误
- 中间件是一种将应用程序与底层的实时操作系统、硬件实现的技术细节隔离开来的软件环境。正确#
错误
- 在分配器中,每个分配端口不一定都要接上匹配负载。正确#
错误
- 光纤对不同波长的光存在的色散现象是直接调制光发射机输出功率受限的唯一原因。VCD中使用的视频图像,是采用()格式进行压缩的。复用技术有多种,模拟通信常用()。正确#
错误A、AVI
B、MPEG-1#
C、QuickTime
D、MPE
- 在卫星电视接收系统中,高频头的输入阻抗为75欧姆,输出阻抗为50欧姆。VCD中使用的视频图像,是采用()格式进行压缩的。SDH的帧结构是以字节为基础的,一个字节是()。正确#
错误A、AVI
B、MPEG-1#
C、QuickTime
D、MP
- 在数字传输系统中,SDH是指准同步数字序列,PDH是指同步数字序列。正确#
错误
- 按DOCSIS标准实现有线电视网络的双向化,对其接入网的要求较高,且带宽提升单价较高。方向控制回路是()。正确#
错误换向回路#
闭锁回路#
节流回路
卸载回路
- EOC主要有两种:基带EOC和调制EOC。下面几种数字电视标准中,()属于欧洲标准。节目播出控制室主要作用是()。正确#
错误A、ISDB
B、DTV
C、DVB#
D、ATSCA、完成节目播出的实时控制,即按节目表的时间顺序,逐一将节