查看所有试题
- 同样转速的发电机磁极对数多的电源频率()。A、低
B、高#
C、不变
D、不一定
- 蓄电池除了浮充电方式外,还有()运行方式。充电;
放电;
充电-放电;#
随意。
- 1THM、2THM、3THM代表()。A.同期合闸小母线#
B.合闸小母线
C.控制小母线
- 35KV设备运行中的绝缘油耐压标准是()KV。A.30KV#
B.35KV
C.40KV
- 要将电压表扩大量程应该()。A.串联电阻#
B.并联电阻
- 在整流电路中,每个二极管所标的反向耐压值指的是()。A.平均
B.有效
C.最大#
- 载流导体周围的磁场方向,与产生该磁场的()有关。A.磁场强度
B.磁力线的方向
C.电流方向#
- 所谓电力系统的稳定性,系指()。A.系统无故障时间的长短
B.系统发电机并列运行的能力
C.在某种扰动下仍能恢复稳定状态的能力#
- 产生过渡过程的外因是()。变压器过电流保护的灵敏度系数lmK是反映保护的一个重要参数,其决定因素有()。A.电路中有储能元件B.电路断开C.电路关闭D.换路。#A、变压器的接线方式B、保护装置的接线方式C、短路故障的
- 当外加电压降低时,电动机的电磁力矩降低,转差()。蓄电池浮充电运行,如果直流母线电压下降,超过许可范围时则应()恢复电压。A.降低B.增大C.无变化D.有变化。切断部分直流负载;
增加蓄电池投入的个数;
增加浮充电
- 万用表不用时应把旋钮放在()。直流电流档;
电阻档;
交流电压档;#
直流电压档。
- 三个相同阻值的阻抗元件,先以星形接入三相对称交流电源,所消耗的功率与再以三角形接入同一电源所消耗的功率之比等于()。1:1;
1:2;
1:3;#
1:4。
- 不能用简单的串联、并联方法计算的复杂电路,它的支路数是()。两个及以上;
三个以上;
三个及以上;#
四个以上。
- 在变电站综合自动化系统中,特别是微机保护、自动装置与监控系统相互通信电路中,主要是使用串行通信。串行通信常采用的物理接口标准有()。电流速断保护不能保护线路的全长,它保护线路的范围的大小与()因素有关。A
- 电流的单位名称是()。库仑;
伏特;
安培;#
欧姆;
- 高压并联电容器并联电阻值与出厂值的偏差应在()范围内。变压器垫料缝渗漏油的原因是()。A、2%B、5%C、10%D、15%A、螺丝和压盖接触不紧密B、垫料不良,需要更换C、结合面不干净有油污D、结合面有锈垢#
- 在二次接线图中所有继电器的触点都是按()的状态表示的。A.继电器线圈中有电流时
B.继电器线圈中无电流时#
C.任意
- 在RL串联的交流电路中,复数阻抗X的模Z等于()。['['R+XL;
;#
R2+;
R2-。
- 对已有单独试验记录的若干不同试验电压的电力设备,在单独试验有困难时,可以连在一起进行耐压试验。此时,试验电压应采用所连接设备中试验电压的()。A、最高值B、最低值C、最高值与最低值之和的平均值D、各试验电压
- PN结空间电荷区是()。如果把电压表直接串在被测负载电路中,则电压表()。电子和空穴构成;
正电荷和负电荷构成;#
施主离子;
施主杂质原子和受主杂质原子构成。指示不正常;
指示被测负线端电压;
线圈被短路;#
- 在星形接线的三相对称电路中,线电压与相电压的相位关系是()。['超前30°;#
滞后30°;
超前120°;
滞后120°
- 将一根金属导线拉长,则它的电阻将()。A.变小
B.不变
C.变大#
- 欧姆定律阐述了电路中()关系。零序电流,只有发生()才会出现。电压与电流成正比;
电压与电流成反比;
电压与电阻成正比;
电压、电流、电阻三者之间关系。#相间故障;
振荡时;
接地故障或非全相运行时;#
短路
- 变压器二次电压相量的标志方法和电动势相量的标志方法()。相反;#
相同;
相似;
无关系。
- 电力系统的内部过电压的倍数规定为内部过电压幅值与其电网工频相电压的()之比值。A、有效值B、幅值C、平均值D、最大值#
- 几个电阻头尾分别连在一起,这种连接叫电阻()。混联;
并联;#
串联;
其他。
- 在企业培训中,最基本的培训方法是()。以二极管半波单相整流电路而言,输入110V有效值电压,则输出平均值电压约为()V。A、讲授法B、专题讲座法C、研讨法D、参观法#A、49#
B、39
C、59
D、79
- 发电机供出的电能是由()转换来的。A.动能
B.机械能#
C.化学能
- 不能用简单的串联、并联方法计算的复杂电路,它的支路数是()。两个及以上;
三个以上;
三个及以上;#
四个以上。
- 电缆敷设到拐弯处,操作人员应站在电缆()进行操作。A、上方B、下方C、内侧D、外侧
- 我国规定发电机的额定入口风温是()。A.40℃#
B.35℃
C.30℃
- 同步电动机可以采用()的运行方式,在电网中改善电网的功率因数和减小电网电压波动做调相机使用。新建架空线路运行前,需在额定电压下,对空载线路进行()次合闸试验,带电运行72h。A、欠励B、欠复励C、过励D、复励A、
- 在电阻、电感、电容组成电路中,不消耗电能的元件是()。发电机并列过程中,当发电机电压与系统电压相位不一致时,将产生冲击电流,此冲击电流最大值发生在两个电压相差为()时。电感、电容;#
电阻与电感;
电容与电
- 人站立或行走在有电流流过的地面时,两脚间所承受的电压称()电压。A.接触B.跨步C.接地D.相同
- 变压器二次电压相量的标志方法和电动势相量的标志方法()。相反;#
相同;
相似;
无关系。
- 发电机变为同步电动机运行时,最主要的是对()造成危害。A.发电机本身B.电力系统C.汽轮机尾部的叶片D.汽机大轴。
- 锅炉所有水位计损坏时应()。充油电力设备在注油后需静置一定时间才进行耐压试验,以下正确的是()。A、紧急停炉B、申请停炉C、继续运行D、通知检修#A、500kV设备静置时间大于72hB、220kV设备静置时间大于48hC、110
- 励磁机碳刷冒火的原因是()。A﹑换向不良引起火花;#
B、机械的原因;#
C、化学原因;#
D、材质原因。
- 发电机的测量元件(热电偶式)是利用两种不同的金属丝接触点在不同温度时所产生()的不同来测定温度的。电动势;#
电阻;
位移;
磁性。
- 运行中励磁机整流子发黑的原因是()。A、流经碳刷的电流密度过高;#
B、整流子灼伤;#
C、整流子片间绝缘云母片突出;#
D、整流子表面脏污。#