查看所有试题
- 当电力系统发生故障时,要求继电保护动作,将靠近故障设备的断路器跳开,用以缩小停电范围,这就是继电保护的()。以下电动机型号中,效率较高是()。采用BCH-2型差动继电器保护的变压器,在确定其基本侧的一次动作电流
- 电子示波器中,()采用单束示波管,单踪或多踪显示,可进行定性或定量测量,是最常用的一种示波器。无载调压变压器安装需解体检查时,调压切换装置的各分接头与线圈的连接应紧固正确,所有接触部位应用()mm的塞尺检查塞
- 二极管的直流电阻R与外加直流电压U、流过二极管电流I的关系是()。之比。长度大于()的高压配电室应设两个出口。复合电压启动过流保护装置的动作电流是按躲过变压器()来整定的。电气变电运行的管理工作主要有(
- 只有发生(),零序电流才会出现。晶体管触发电路中,要使输出脉冲产生相位移动,达到移相控制的目的,需改变大小的是()。电气设备送电方案编写时注意()。变压器的气体继电器安装方法正确的是()。A.相间故障B.振荡
- 下列各种类型的继电保护中,在电流、电压等数据采集输入不需要在电流互感器、电压互感器与电子电路之间设置变换、隔离等一些传变环节的是()。以下属于变压器小修项目的是()。一般由短路引起的功率变化量ΔSA、晶体
- 在爆炸危险环境中接地干线宜在不同方向与接地体相连,连接处不得少于()点。A、1B、2C、3D、4
- 断路器大修后应进行()。在贮罐的化工设备图中,表示设备(贮罐)总的长度是()尺寸。头脑风暴法是围绕某个中心议题,毫无顾忌、畅所欲言地发表独立见解的一种()的思想方法。交流耐压试验会对某些设备绝缘形成破坏
- 交流电流表指示的电流值,表示的是交流电流的()值。在爆炸危险场所中,不得作为保护接地线用的有()。A.有效B.最大C.平均D.最小值#A、输送爆炸危险物质的金属管道B、电气线路中的工作零线C、接地干线D、PE线#
- 在停车操作阶段不是技师所必须具备的是()。系统中的电路参数(R、L、C)在特定组合时,系统有可能出现幅值较高的()。用拉路法寻找直流接地时,应遵循()原则。新建架空线路运行前,需在额定电压下,对空载线路进行
- 对异步电动机启动的主要要求()。常用电力系统发生三相短路时产生的()来校验电气设备和载流导体的动稳定度。演示文稿可创建的类型有()。电气事故处理时,可不经请示批准就自行处理的是()。启动电流倍数小,启动
- 在停车操作阶段不是技师所必须具备的是()。发电机装设低电压闭锁过流保护,是用来防御发电机外部发生三相对称短路时,而引起的()。母线不完全差动保护一般由()保护装置构成。A、组织完成装置停车吹扫工作B、按进
- 在贮罐的化工设备图中,贮罐的筒体内径尺寸Ф2000表示的是()尺寸。单相桥式整流电路中,每个二极管承受的最大反向电压是变压器次级绕组电压有效值的()。在对工程问题的分析中,当系统电源容量大于所研究的中小型企业
- 集成运放内部电路的耦合方式是()。变电站综合自动化系统的功能和结构都在不断地向前发展,()的结构一定是今后发展的方向。微机保护系统在采样过程中必须遵循香农采样定理。香农采样定理提出,采样频率必须满足()
- 交流电流表指示的电流值,表示的是交流电流的()值。技术改造包括()。A.有效B.最大C.平均D.最小值#A、更新B、安措C、环措D、技措
- 下列哪种接线的电压互感器可测对地电压()。以二极管半波单相整流电路而言,输入110V有效值电压,则输出平均值电压约为()V。在中性点不直接接地系统中,由于()电压互感器即产生铁磁谐振。A.Y,yB.Y,ynC.YN,ynD..,yn
- 如果二次回路故障导致重瓦斯保护误动作变压器跳闸应将重瓦斯保护()变压器恢复运行。当断路器三相跳、合闸不同期超过标准时,对运行的危害是()。A.可能误投入B.退出C.继续运行D.运行与否都可以A、变压器空载电流增
- 二极管内部PN结的结构特点,二极分为点接触型和()接触型。发电机发出的电能是由()转换来的。直流耐压试验的作用是()A.线B.面C.点D.其他。A.动能B.机械能C.化学能D.光能A、检查设备的绝缘状况,其试验电压较高#
B
- 探测电缆故障点,对电缆采用“烧穿”时,加在故障点芯线上的高电压,一般()直流耐压试验电压。中性点不接地系统,一旦发生间歇性单相接地故障,容易产生系统()。用拉路法寻找直流接地时,应遵循()原则。培训项目即将实
- 交流电角频率的单位名称是()修复后的小型变压器的各绕组之间和它们对铁芯(地)的绝缘电阻,其值不应低于()。反事故演习方案的编制一定要()。度;#
弧度;
弧度每秒;
焦耳A、0.5MΩB、1MΩC、2MΩD、10MΩA、贴近
- 能推动电子沿导体流动一种力量,也可以说是电流的一种动力,我们称之为()。采用快速灭磁方式,使电动机转入无励异步状态,消除失步危害,这一过程是在电动机自失步到再同步的整个机电暂态过程中的()阶段完成的。采用B