查看所有试题
- 下列()是引起机械振动的内因。A.安装精度不够
B.构件的刚度
C.构件的质量
D.构件的质量和刚度#
- 塑料是以()为主要成分,再加入一些用来改善其使用性能和工艺性能的添加剂,在一定温度、压力下加工塑制成的材料。A.合成树脂
B.合成橡胶
C.合成纤维
D.合成乙烯#
- 当压缩机处于()情况下,不得从压缩机上松开或取下螺栓。膨胀阀的形式主要有()A、真空
B、有空气
C、有压力#内平衡式#
外平衡式#
C型
H型#
- 交流电压的有效值的表达式为()。
- 热继电器的整定值为6.8A,则动作范围应选用()。电机中所用的材料分为()。A、0.4~0.64A
B、0.64~1A
C、4~6.4A
D、6.4~10A#导电材料#
导磁材料#
绝缘材料#
结构材料#
- 立式壳管式冷凝器正常运行时,冷却水不能中断,压力不得超过()Mpa。用水作制冷剂需具备的主要条件是()在一个完全密闭房间内,房温升高5℃,相对湿度会()。A、0.5
B、1.0
C、1.5#
D、2.0高压力#
高真空度
高温度升高
- 颚式破碎机中应采用()机构为主运动机构。凸轮的()决定了凸轮机构从动件预定的运动规律。摩擦轮传动中,所需压紧力Q的大小与()有关。A.偏心轮#
B.曲柄滑块
C.双曲柄
D.曲柄摇杆A.转速
B.轮廓曲线#
C.型式
- 在控制线路中,熔断器所起到的保护是()。过流保护
过压保护
过载保护
短路保护#
- 相位控制法适用于()调压电路转速电流双闭环调速系统在稳态工作点上时,控制电压不取决于()。A、直流
B、交流#
C、交、直流
D、高频交流负载电流
给定电压
转速
电枢电压#
- 从反应堆中卸出的辐照过的燃料,通常称为()。A、贫化铀
B、核燃料
C、乏燃料#
- 零件图中除了一组完整、清晰地表达零件的结构形状的视图外,还包括()表面粗糙度代号标注中,如数字标注为“3.2max”,则表示其Ra为()。下面偏差的说法中不正确的是()A.技术要求#
B.生产批量
C.装配尺寸
D.零部
- 不属于辅助加热源的是()电加热
用燃烧料加热
太阳温度加热#
用非峰值电力储存的热量
- 营销系统应用水平评测,以下说法错误的有()隐极式发电机组以超前功率因数运行时的约束有()。A、营销系统应用水平评测包括系统功能完备性、系统数据完整性和系统运维管理
B、系统数据完整性包括系统覆盖率、业务数
- 10kV的真空断路器,应选用()触头材料。铜铋铈合金#
银铁粉末冶金
纯银
银氧化镉
- 30岁,原发不孕3年,月经规律,经量中等,痛经显著,左附件区触及直径6cm囊肿,活动好。基础体温双相,HSG宫腔大小形态正常,履行反洗钱报告职责。
全国通业务只需对大额存款业务进行监控和识别,履行反洗钱报告职责。#
- 下列带传动中,在相同条件下传动能力最强的是()下列传动方式中,只能用于平行轴间传动的是()A.V带传动
B.圆皮带传动
C.平皮带传动
D.多楔带传动#A.齿轮传动
B.蜗杆传动
C.链传动#
D.摩擦轮传动
- 根据《国家电网公司供电服务规范》规定,拆回的电能计量装置应在表库至少存放(),以便客户提出异议时进行复核。在确定火力发电厂主厂房的方位时,应首先重点考虑的是()A.1个月B.2个月C.3个月D.6个月#电厂的交通问题
- 下列肺脓肿的描述,哪一项属于慢性期表现()男,排尿困难10年,高度怀疑前列腺癌。为明确诊断,需做下列哪项检查()编码于“影响健康状态和与保健机构接触的因素(200-299)”这一章的情况是()左肺大片致密影,空洞及中
- 材料力学研究的变形主要是()A.弹性
B.弹性变形#
C.塑性
D.塑性变形
- 液力传动可用于()对于一对材料相同的软齿面齿轮传动,常用的热处理方法是()。A.仪表传动机构
B.平行轴间传动
C.换挡变速
D.大型设备启动#小齿轮淬火,大齿轮调质
小齿轮淬火,大齿轮正火
小齿轮正火,大齿轮调质
- 2011年强化电能计量管理的主要内容有()全球能源互联网技术创新的方向()。A、力争年内公司10个供电局计量中心取得国家认可实验室资格#
B、2011年公司80%地市供电单位的计量表计要做到集中检定,昆明等10个供电局年
- 在装配图中,一般不注()使用游标卡尺读数时,副尺上“0”刻度线所对正的主尺位置左方第一条刻度线即为读数的()。装配图里零件的名称、材料、数量等可以从()中读出。A.性能尺寸
B.规格尺寸
C.具体结构尺寸#
D.
- 水润滑尾轴承可采用()材料生产。船用发电机的轴与滚动轴承的配合松动、离心泵的轴与叶轮的配合松动均可采用()修理,获得良好的修理质量。利用有机黏接技术可修理产生松动的过盈配合件、有裂纹和()的零件。A.工
- 对零件进行尺寸标注时,在长、宽、高三个方向()尺寸基准。表面粗糙度代号标注中,如数字标注为“3.2max”,则表示其Ra为()。A.不一定有
B.均应有
C.均应有一个主要#
D.必须有一个A.上限值为3.2μm
B.上限值为3.2
- 螺杆式制冷压缩机停机时,出现多次倒转是()没有关严造成的。溴化锂溶液有大量渗漏时,对人体主要危害是()A、滑阀
B、止逆阀#
C、吸气阀
D、排气阀皮肤损害#
窒息
中毒
- 对零件进行尺寸标注时,在长、宽、高三个方向()尺寸基准。A.不一定有
B.均应有
C.均应有一个主要#
D.必须有一个
- 下列思想家中主张“性恶”论的是()我国现行的税收制度设有()个税种。世硕
孟子
荀子#
董仲舒20
24#
26
30
- 流程处理完毕后,使用以下哪个功能对事件进行归档?()即席查询-售电量价费查询功能包含以下哪些维度可供选择()代办事项#
工单查询
工单管理
营销异常管理A、供电单位#
B、账务月份#
C、核算单元#
D、电压等级#
- 按照工程建设阶段分,合同的类型不包括()。建设工程勘察合同
建设工程设计合同
建设工程施工合同
建设工程监理合同#
- 下面哪一个不是核燃料循环的模式:()压水堆核电厂的()使用海水或淡水冷凝蒸汽。A、后处理模式
B、“一次通过”模式
C、“waitanD、see”模式
D、前处理模式#A、一回路
B、二回路
C、三回路#
- 在操作接触器联锁正反转控制线路时,要使电动机从正转变为反转,正确的操作方法是()可直接按下反转启动按钮
可直接按下正转启动按钮
必须先按下停止按钮,再按下反转启动按钮#
- 我国现在最大的图书馆是(),其前身京师图书馆于1910年开始筹建,1912年正式开放。A、国家图书馆#
B、上海图书馆
C、南京图书馆
- 要求各项整流指标好,但不要逆变的小功率场合应采用()电路。单相全控桥
单相半控桥#
三相半波
三相半控桥
- 国际原子能机构(IAEA)总部设在()。设有三台相同的水泵,当一台工作时,测得流量为Q,若三台泵并联工作,总流量为()A、奥地利维也纳#
B、瑞士日內瓦
C、美国纽约大于3Q;
等于3Q;
小于3Q;#
不一定,取决于管路特性
- 冷凝器水侧积垢会使机器的能耗()减少
增加#
无变化
- 普通高阶通道电路电路类型标识符为()。以下哪项不符合新生儿的特点()VP
HP
DB
无#A.第1次排尿多在生后48小时以后B.肾脏浓缩功能差,易造成水肿或脱水C.早产儿呼吸不规则,可有呼吸暂停D.新生儿心率波动较大,在120~
- 在两种导电介质的分界面处,电场强度的()保持连续.切向分量#
幅值
法向分量
所有分量
- 我国核工业创建的时间是()。A、1950
B、1955#
C、1960
- 关于印章以下说法错误的是()急性肺水肿紧急处理时的卧位,下列哪项不正确()A、业务印章必须统一规格式样,统一刻制
B、业务日戳须指定专人保管,并建立交接班制度
C、待销毁的印鉴应严格管理,禁止使用并及时销毁
D
- 一般情况下,热继电器中热元件的整定电流为电动机额定电流的()倍4~7
0.95~1.05#
1.5~2