查看所有试题
- 变频器的调压调频过程是通过控制()进行的。不是跟随性能指标是()。A、载波
B、调制波#
C、输入电压
D、输入电流上升时间
峰值时间
调节时间
动态降落#
- 某直流调速系统最高理想转速为1450转/分,最低理想空载转速250转/分为,额定负载静态速降为50转/分,该系统调速范围为()在一般可逆电路中,最小逆变角βmin选在下面那一种范围合理()。A、5
B、6
C、7#
D、8A、30°-35°
- 三相全控桥直流最大输出电压(考虑90%电网电压)其计算公式为()同一电器的各元件在电路图和接线图中使用的图形符号、文字符号要()A、2.34×0.9×UL×cosɑ
B、2.34×0.9×UΦ×cosɑ#
C、1.17×0.9×UΦ×cosɑ
D、2.34×UΦ×cos
- 常用的数字滤波方法不包括()绕线转子异步电动机的串级调速属于()的调速方法。A.算术平均值滤波
B.中值滤波
C.中值平均滤波
D.几何平均值滤波#转差功率消耗型
转差功率回馈型#
转差功率不变型
- 根据生产机械运动部件的行程或位置,利用()来控制电动机的工作状态称为行程控制原则。永磁同步电动机变频调速系统在采用矢量控制时定子旋转磁势应保持与()垂直。电流继电器
时间继电器
位置开关#
速度继电器气隙
- 双闭环直流调速系统的起动过程中不包括()带二极管整流器的SPWM变频器是以正弦波为逆变器输出波形,是一系列的()矩形波。A.转速调节阶段
B.电流上升阶段
C.恒流升速阶段
D.电流下降阶段#幅值不变,宽度可变#
幅
- 当线圈通过的电流为额定值时,过电流继电器的衔铁()动作
不动作#
不确定
- 下列交流异步电动机的调速方法中,应用最广的是()直流电机的三种调速方法中属于恒转矩调速的有()。无刷直流电动机的控制离不开位置检测器,它使用的是()位置检测器。A.降电压调速
B.变极对数调速
C.变压变频
- 一般的间接变频器中,逆变器起()作用。A、调压;
B、调频;#
C、调压与逆变;
D、调频与逆变
- 交流感应电动机调压调速时,其转差功率()。不变
全部以热能形式消耗掉#
大部分回馈到电网或转化为机械能予以利用
- 带二极管整流器的SPWM变频器是以正弦波为逆变器输出波形,是一系列的()矩形波。与矢量控制相比,直接转矩控制()幅值不变,宽度可变#
幅值可变,宽度不变
幅值不变,宽度不变
幅值可变,宽度可变调速范围宽
控制性能受
- 转速负反馈调速系统机械特性硬度比电压负反馈调速系统机械特性硬度()直流斩波调速系统在回馈电流可控的回馈发电制动时,直流电动机的反电势()直流电源的电压。A、硬#
B、软
C、一样
D、不变大于
等于
小于#
- 永磁同步电动机变频调速系统在采用矢量控制时定子旋转磁势应保持与()垂直。气隙磁通轴线
转子磁极轴线#
转子磁链轴线
- 对直流调速系统来说,主要的扰动量是()。电网电压的波动
负载阻力转矩的变化#
元件参数随温度变化
给定量变化
- 闭环调速系统设置了两个调节器,即电流调节器和()调节器。如果热继电器出线端的连接导线过细,会导致热继电器()A.转速#
B.转差
C.电压
D.电流提前动作#
滞后动作
过热烧毁
- 感应电动机超同步串级调速系统在电动工况运行时,电动机转子侧的可控整流器工作在()状态。不控整流
可控整流
无源逆变
有源逆变#
- 异步电动机串级调速系统,当调速范围较小时,一般采用的起动方法是()。用串级调速装置起动
定子降压起动#
转子升压起动