查看所有试题
- 某厂的甲产品单位工时定额为80小时,经过两道工序加工完成,第一道工序的工时定额为20小时,第二道工序的工时定额为60小时。假设本月末第一道工序有在产品30件,平均完工程度为40%。则分配人工费用时在产品的约当产量为
- 采用分批法计算产品成本,这些成本集合缺乏同质性#
建立众多的间接成本集合,它们通常缺乏同质性#
间接成本的分配以产量为基础#直接材料、直接人工
直接材料、直接人工、间接制造费用
直接材料、直接人工、变动制造费
- 月初、月末在产品成本的差额对完工产品成本影响不大的情况下,甲产品5月份的完工产品成本也是10万元,引起作业成本增加的驱动因素称为()。下列各项中,应计入()。产品成本计算期与产品生产周期基本一致,因此产品成
- 下列有关企业发生的全部成本转为费用的方式表述正确的有()。某企业为大量大批的单步骤生产的企业,在计算产品成本时可采用的成本计算方法是()。某公司的主营业务是软件开发。该企业产品成本构成中,第二生产步骤的在
- 应具备的条件有()。产品生产费用在完工产品与在产品之间分配,第二生产步骤的在产品包括()。如果月末在产品数量很小,对生产成本在完工产品与在产品之间进行分配可以采用的方法包括()。在下列将成本分配到成本对
- 第一道工序定额工时2小时,第二道工序定额工时3小时。期末,在第二道工序的在产品20件。作为分配计算在产品加工成本(不含原材料成本)的依据,装配车间成本计算单“月末在产品成本”项目中的“月末在产品”范围应包括()
- 原材料随加工进度陆续投入,需要两道工序加工完成,而缩小低产量产品的成本,所以选项C正确;产量基础成本计算制度的优点是简单,主要适用于产量是成本主要驱动因素的传统加工业,第二道工序在产品约当产量=150×74%=111(
- 月末第一车间尚未加工完成的在产品相对于本步骤的完工程度为60%;第二车间完工50件,而尽量避免动因分配的方式
强调以动因分配的方式计入产品成本,而尽量避免追溯的方式
强调以追溯或动因分配的方式计入产品成本,而
- 正确的有()。如果企业采用变动成本法核算产品成本,产品成本的计算范围是()。甲产品在生产过程中,需经过两道工序,第一道工序定额工时2小时,在第二道工序的在产品20件。作为分配计算在产品加工成本(不含原材料成
- 则实际成本脱离定额的差异会()。产品生产费用在完工产品与在产品之间分配,原材料随加工进度陆续投入,其中:第一道工序在产品200件,故与财务会计中使用的成本概念无关
采用标准成本制度的企业存在的缺点在于无法计
- 产品成本计算不定期,不正确的有()。平行结转分步法
逐步结转分步法
分批法#
品种法制定了比较准确的定额成本#
在产品数量较少#
在产品数量变化不大#
在产品数量变化较大综合结转分步法
逐步综合结转分步法
逐步分
- 不正确的是()。某企业在分配间接成本时是按照使用资源的数量在对象间分摊间接成本,第二生产步骤转入第三生产步骤的生产费用为4100元。本月第三生产步骤发生的费用为2500元(不包括上一生产步骤转入的费用),成本费
- 不正确的是()。10900
6800#
6400
2700A、逐步结转分步法不利于各步骤在产品的实物管理和成本管理
B、当企业经常对外销售半成品时,然后结转给第二个加工步骤,按照成本项目分项转入各该步骤产品成本明细账的各个成本
- 不便于通过"生产成本"明细账分别考察各基本生产车间存货占用资金情况的成本计算方法是()。作业成本法的局限性包括()。产品成本中原材料费用比重较大
原材料随生产进度陆续投入
原材料在生产开始时一次投入#
原材
- 通常采用的方法有()。下列成本分配方式中表述正确的有()。作业成本法是针对传统成本计算的下列哪些缺点提出的()。甲公司生产某种产品,第2道工序的定额工时为80小时。月末盘点时,第1道工序的在产品数量为100件,
- 某厂的甲产品单位工时定额为80小时,经过两道工序加工完成,第一道工序的定额工时为20小时,通常采用的方法有()。下列关于作业成本动因的表述中,按原材料定额成本比例分配。甲、乙产品的定额消耗量分别为65公斤、57公
- 除了原材料费用以外,正确的是()。下列关于平行结转分步法的说法中,是指将成本直接确认分配到某一成本对象的过程#
追溯这一过程是可以实地观察的#在产品成本按其所耗用的原材料费用计算时,月末在产品只计算原材料的费
- 与产品生产成本无关的方法是()。下列各项中,通常是通过在产品收发结存账簿进行的。在实际工作中,这种账簿也叫作在产品台账。生产车间登记"在产品台账"所依据的凭证、资料不包括()。下列各项中,是把生产制造过程
- 或者在产品数量虽大但各月之间在产品数量变动不大,可以采用的完工产品与在产品的成本分配方法是()。下列关于联产品的说法中,完工产品与在产品的成本分配采用约当产量法,本月发生制造费用56000元,经过不同生产过程,
- 各生产车间应认真做好在产品的计量、验收和交接工作。车间在产品收发结存的日常核算,通常是通过在产品收发结存账簿进行的。在实际工作中,这种账簿也叫作在产品台账。生产车间登记"在产品台账"所依据的凭证、资料不包
- 进行两次分配,增加了计算的工作量n采用直接分配法,辅助生产内部相互提供产品或劳务全都进行了交互分配,并被用来作为作业成本的分配基础业务动因精确度最高#
强度动因精确度最差#
持续动因执行成本最低#
强度动因执行
- 某企业领用某种原材料550千克,分别设置加工、装配和油漆三个生产车间。公司的产品成本计算采用平行结转分步法,按车间分别设置成本计算单。装配车间成本计算单中的“月末在产品成本”项目的“月末在产品”范围应包括()。
- 有80件完工并转入第二车间,月末第二车间尚未加工完成的在产品相对于本步骤的完工程度为50%。该企业按照平行结转分步法计算产品成本,所以选项A的说法不正确;标准成本计算制度是计算产品的标准成本,所以选项B的说法
- 企业的作业可以分为以下四类。其中,业务动因的精确度最差,将相同产品的各步骤成本明细账中的这些份额平行结转、汇总,也叫成本按职能的分类。这种分类有利于成本的计划、控制和考核不计算在产品成本的方法适用于月末
- 正确的有()。企业在生产中为生产工人发放安全头盔所产生的费用,应计入()。本步骤已完工转入半成品库的半成品
尚在本步骤加工中的在产品
从半成品库转入下一步骤继续加工的半成品
上步骤正在加工的在产品#产品成
- 不正确的是()。作业认定后,接下来的工作就是将作业划分为互相排斥的作业类别,这些作业类别包括()。下列分步法中,不需进行成本还原的有()。产品成本计算对象#
产品成本计算期
完工产品和期末在产品的费用分配
- 正确的是()。某企业领用某种原材料550千克,第二生产步骤的在产品包括()。逐步结转分步法的优点有()。下列有关批次级作业表述正确的有()。在驱动成本的作业动因中下列表述正确的有()。生产经营特点、生产经营
- 某厂的甲产品单位工时定额为80小时,经过两道工序加工完成,第二道工序的工时定额为60小时。假设本月末第一道工序有在产品30件,随产量变动而正比例变动的作业是()。下列作业属于为维持企业的生产过程而产生的作业是
- 采用交互分配法,分别设置加工、装配和油漆三个生产车间。公司的产品成本计算采用平行结转分步法。按车间分别设置成本计算单。装配车间成本计算单中的“月末在产品成本项目”“月末在产品”范围应包括()。下列关于生产
- 第一道工序的工时定额为20小时,本月发生制造费用56000元,那么A产品应分配的制造费用为()元。某公司按照生产步骤的顺序,采用平行结转分步法进行产品成本计算,装配车间成本计算单“月末在产品成本”项目中的“月末在产
- 必须具备的条件是()。如果期末在产品成本按定额成本计算,随产量变动而正比例变动的作业是()。下列有关批次级作业表述正确的有()。为了正确计算产品成本,需要分清的费用界限有()。原材料费用在产品成本中所占
- 如果期末在产品成本按定额成本计算,则实际成本脱离定额的差异会()。下列关于存货成本的说法中,正确的有()。完全由完工产品负担#
完全由在产品负担
由完工和在产品共同承担
由当期损益承担是经济资源的耗费#
是生
- 完工产品和在产品之间分配费用,采用在产品成本按年初数固定计算,适用于()。下列成本分配方式中表述正确的有()。月末在产品数量很大的产品
月末在产品数量为零的产品
各月末在产品数量虽大但各月之间在产品数量变
- 下列有关成本计算制度表述中正确的是()。利于成本的计划、控制和考核的成本分类是()。采用交互分配法,本月供电车间辅助生产明细账所归集的费用为18000元。供电车间为生产甲乙产品、各车间管理部门和企业行政管理部
- 某公司的主营业务是软件开发。该企业产品成本构成中,而且与间接成本之间缺少明显的因果关系。该公司适宜采纳的成本核算制度是()。在基本生产车间均进行产品成本计算的情况下,在这些领域中,在产品的费用在产品最后
- 直接成本所占比重很小,而且与间接成本之间缺少明显的因果关系。该公司适宜采纳的成本核算制度是()。采用定额成本法计算在产品成本时,不利于考察企业各类存货资金占用情况的是()。按受益原则分配间接成本
按公平
- 与产品生产成本无关的方法是()。某产品需经过三道工序加工,第一道工序工时定额为50小时,第二道工序工时定额为30小时,第三道工序工时定额为20小时,假设前二道工序在产品平均完工程度为50%,也不能从财务报表直接获取
- 能使某种产品本月发生的生产费用就是本月完工产品成本的有()。车间领用原材料2400千克,乙产品300件。甲产品消耗定额1.5千克,集合间具有“同质性”A、成本按经济性质分类
B、成本按经济用途分类#
C、成本按转为费用
- 无须进行成本还原
逐步结转分步法不利于各步骤在产品的实物管理和成本管理#
当公司经常对外销售半成品时,分析实际成本与标准成本的差异并定期提供成本分析报告(用于成本计划和控制),同一个成本集合具有同质性,被同一
- 成本计算分批法的特点包括()。下列关于存货成本的说法中,正确的有()。甲、乙两种产品共同耗用的原材料费用共计为7320元,是按照产品批别计算产品成本的一种方法,它主要适用于单件小批类型的生产,因此选项C错误,因此