查看所有试题
- CDMA系统中,移动交换子系统(NSS)与基站子系统(BSS)之间的接口为()。伪导频硬切换参数要依据()负荷的情况来设置。A接口#
Um接口
Uu接口
Iub接口A、30%
B、40%
C、50%#
D、60%
- 而且一次切换过程所需的时间也比软切换长,需要从各方面注意保证硬切换的成功率。
B、硬切换触发门限不能太低,一般原小区导频强度降到-9dB,就应触发硬切换,-10dB。
C、手机的异频搜索需要一定的时间,所以需控制手机进
- 在协议规定的IS95A的硬切换方案中,采用纯软件方法实现的是()A、PBU
B、PBD
C、RTD#
D、RBD
- 以下那条命令是从BSC下载软件到BSC硬盘?()M2510001pch是谁的补丁文件()CREATERSUDB
CREATERSUSWLH#
SETBACKNEWBSCOSUSW
SETBSCOSUSWMEMT
TDPC
MPCC#
ME2M
- BSC通过()消息将需要搜索的异频的频点、相邻关系、以及搜索的参数发给手机,以启动手机的异频搜索。A、CFSRQM#
B、CFSRSM
C、CFSCNM
D、CFSRPM
- 关于伪导频以下说法错误的是()A、在做网络规划时,强调伪导频要和真实导频保持相同的覆盖,这样手机测量
到伪导频时,就可将伪导频的强度当做真实目标导频的强度。
B、但为减少掉话率,伪导频应该比它所代表的真实导频
- 在手机的搜索过程中,BSC可通过发出()消息,控制手机搜索的启停。没有软切换A3/A7通路时,配置OUTER_BSC_ID为()A、CFSRQM
B、CFSRSM
C、CFSCNM#
D、CFSRPMA、0
B、1#
C、2
D、3
- GSM频率复用是指在不同间隔区域使用相同频率进行覆盖。GSM无线网络规划基本上采用每()个基站为一群。我国GSM通信系统采用l800MHz频段时,工作带宽为()。3
4
6#
825MHz
45MHz
75MHz#
95MHz我国GSM通信系统采用900MHz频
- GSM中的随路控制信道(DCCH)可细分为()。公共控制信道
独立专用控制信道#
慢速随路控制信道#
快速随路控制#
随机接入信道
- 增加异频切换载频相邻关系的命令是()A、ADD DFNBRPILOT#
B、ADD NBRPILOT
C、ADD PILOTOL
D、ADD SFNBRPILOT
- GSM通信系统采用的多址方式为()。IS95B以上手机适用()跳码扩频
频分多址#
时分多址#
空分多址
扩频多址A、伪导频硬切换#
B、MAHHO#
C、同频硬切换#
D、HANDDOWN硬切换#频分多址是把整个可分配的频谱划分成许多单个
- 决定是否根据收索结果,进行异频的硬切换。关于手机辅助硬切换,下列说法错误的是()A、CFSRQM
B、CFSRSM
C、CFSCNM
D、CFSRPM#A、硬切换是先断后连,需要从各方面注意保证硬切换的成功率。
B、硬切换触发门限不能太低
- BSC根据当前呼叫的分支的数据配置情况,通过()消息将T_ADD、T_DROP等重要的切换参数发送给手机。A、ITSPM#
B、NLUM
C、ENLUM
D、HDM
- 如果发现BSC的熔丝和告警面板(BFAP)上的:“MPCC“这以指示灯在闪烁,那么下列哪一个不能导致上述结果()BSC机柜中基本框右侧的电源完全不能正常工作
BSC机柜中基本框左侧的电源完全不能正常工作#
BSC机柜中基本框右
- 硬切换时,候选导频的搜索方式有()以下哪种模块是TDPC的内存板()A、单步搜索#
B、多步搜索
C、周期搜索#
D、随机搜索NPCC
PPLD
QRLP
MEMT#
- 保险经济学中,保险供给弹性是指()。供给量的相对变化与影响保险供给的某一种自变量的相对变化之比#
供给量的绝对变化与影响保险供给的某一种自变量的绝对变化之比
供给量的相对变化与影响保险供给的某一种自变量的