查看所有试题
- 再结晶退火是把经过()的零件,加热至再结晶温度以上,保温后缓冷的一种操作。下列钢经淬火后硬度最低的是()亚共析钢的加热温度在Ac3+30~50℃范围,使钢的组织完全奥氏体化,淬火后获得马氏体和少量的残余奥氏体,此
- 等温退火是钢件加热到Ac3或Acl以上,是为了使内部组织()正火能够代替完全退火,获得的组织强度和硬度和退火相比()下列关于没淬上火的原因,说法不正确的是()淬火钢进行中温回火的目的是为了提高钢的()零件表面
- 具有强硬且耐磨性能的组织是()共析钢退火后的组织主要是()把钢加热使之全部为奥氏体,保温后快速冷却至珠光体转变温度,等温停留一段时间使奥氏体完全转变为珠光体后再空冷至室温,这种操作称为()再结晶退火是把
- 不完全退火是把()钢加热到一定温度、保温后缓冷的一种操作。过共析钢的加热温度在Ac1+30~50℃范围,使钢的组织完全奥氏体化,淬火后获得马氏体和少量的残余奥氏体,此称()淬火钢进行中温回火的目的是为了提高钢的
- 钢的完全退火能够降低硬度、细化组织,适用于()钢和铸钢件、锻件及热轧件。下列退火中,无相变的热处理工艺是()钢经淬火和中温回火后可提高钢的()淬火再进行高温回火,便可获得综合机械性能高的()液体C-N共渗称
- 不完全退火时应把过共析钢加热,使之全部为()下列钢经完全退火后,()钢可能会析出网状渗碳体。15钢板冷变形后应进行的热处理工艺是()钢中加入除Co之外的其他合金元素一般均能使其C曲线右移,从而()下列关于没淬
- 不完全退火时应把过共析钢加热,使之全部为()过共析钢的加热温度在Ac1+30~50℃范围,使钢的组织完全奥氏体化,淬火后获得马氏体和少量的残余奥氏体,此称()零件表面化学热处理可以改变表面的()()位于焊缝内部,
- 消除金属塑性变形后产生的残余应力,应采取的措施是()亚共析钢的加热温度在()范围,使钢的组织完全奥氏体化,淬火后获得马氏体和少量的残余奥氏体,此称完全淬火。下列各材料中淬火时最容易产生淬火裂纹的材料是()
- 球化退火的目的是为了()表面化学热处理是通过改变零件表面()来改善零件性能。下列属于只是强化表面,不改变心部组织的表面热处理是()。Ⅰ.表面淬火;Ⅱ.渗碳;Ⅲ.渗氮;Ⅳ.氮化。中高速柴油机曲轴为了提高零件
- 完全退火亦可称为()过共析钢进行下列()热处理可能会造成网状渗碳体析出。等温淬火可使钢具有的组织是()钢经淬火后,为消除脆性应进行()淬火钢出现不可逆回火脆性的温度是()A.退火
B.重结晶退火#
C.再结
- 球化退火是把()加热到Acl+10~20℃长时间保温后缓冷的一种操作工艺。15钢板冷变形后应进行的热处理工艺是()对工件进行分级淬火的目的是()使活性碳原子渗入零件表面的工艺称为()表面淬火适用于以下()材料强
- 完全退火亦可称为()在船上,用喷灯将用过的紫铜加热至600℃左右后,再放在水中冷却这种操作属于()正火是把钢加热至Ac3或Acl或Accm以上30~50℃,保温后在()中冷却一种操作。亚共析钢的加热温度在()范围,使钢的组
- 15钢板冷变形后应进行的热处理工艺是()下列退火中,无相变的热处理工艺是()为消除淬火钢的脆性,保持强度和硬度,必须进行()氮化的目的主要是为了零件表面具有()A.低温退火
B.完全退火
C.再结晶退火#
D.球
- 低温退火的目的是消除()正火能够代替完全退火,获得的组织强度和硬度和退火相比()当滚动轴承钢用来制作量具、模具时,冷处理的目的是()为消除淬火钢的脆性,保持强度和硬度,必须进行()氰化属于()A.脆性
B.
- 过共析钢的加热温度在Ac1+30~50℃范围,使钢的组织完全奥氏体化,淬火后获得马氏体和少量的残余奥氏体,此称()一般螺丝刀要求硬度高、耐磨性好、韧性好时,最好采用的热处理是()淬火钢在150~250℃回火可获得()淬
- 不完全退火是把()钢加热到一定温度、保温后缓冷的一种操作。球化退火的目的是为了()把钢加热使之全部为奥氏体,保温后快速冷却至珠光体转变温度,等温停留一段时间使奥氏体完全转变为珠光体后再空冷至室温,这种操
- 下列关于没淬上火的原因,说法不正确的是()火钢在350~500℃回火可获得()淬火钢出现不可逆回火脆性的温度是()表面淬火可使零件表面获得的性能是()。感应加热表面淬火适用于()。A.亚共析钢加热温度低或保温
- 淬火钢回火时通常可调配出()完全退火的目的之一是()下列各材料中淬火时最容易产生淬火裂纹的材料是()将淬火钢重新加热至()以下一定温度,保温后在空气中冷却的操作,称为回火。表面化学热处理是通过改变零件表
- 回火屈氏体是()状F与Fe3C的机械混合物。共析钢退火后的组织主要是()球化退火是把()加热到Acl+10~20℃长时间保温后缓冷的一种操作工艺。把钢加热使之全部为奥氏体,保温后快速冷却至珠光体转变温度,等温停留一段
- 低温退火的加热温度应在()淬火是将钢件加热到(),经保温后急速冷却的一种操作。将淬火钢重新加热至()以下一定温度,保温后在空气中冷却的操作,称为回火。表面化学热处理是通过改变表面()来提高和改善表面性能