查看所有试题
- 必须采用()。下列各项中,不属于交流电的三要素之一的是()。使用电感时,电压有效值上升5%,电感的电压和电容上的电压均为22V,UL=30V,UC=()。处于谐振状态的RLC串联交流电路中,必须有中线#
B.三相对称负载做星
- 三相对称负载Y形连接,其线电压440V,如表针立即向0偏转,然后回复到“∞Ω”处,下列说法错误的是()。使用电容器时,电容两端的正弦交流电压频率下降5%,其他不变,则电容器上的电流()。由电阻R=8Ω和感抗XL=6Ω串联后,接到2
- 三相电路的各相负载分别为R、XL、XC,且R=XL=XC,则此三相负载属于三相()。正常情况下用电压表测的电压值是();而设备名牌上的电压值是()。使用电感时,若电感两端的正弦交流电压有效值上升10%,其他不变,则电感
- 其线电流IL=20A,则其相电流IP为()。正常情况下用电压表测的电压值是();而设备名牌上的电压值是()。在RLC串联交流电路中,复阻抗的表达式是()。关于提高感性线路的功率因数的下列说法,错误的是()。三相对
- 在三相异步电动机供电线路中,通常没有中线,这是因为()。正常情况下用电压表测的电压值是();而设备名牌上的电压值是()。在LC串联正弦交流电路中,已知电源电压U=50V,UL=30V,UC=()。三相对称负载接三相对称
- 电路呈()性质。关于提高感性负载线路的功率因数的下列说法,正确的是()。一电感性负载,并联上适当的电容,则()。三相对称负载接三相对称电源,下列说法错误的是()。用测流钳测对称三相电流。当测流钳钳住一根进
- 则读数为()。所谓的“工频”正弦交流电,是指()。按照电工电量符号一般约定,在纯电感正弦交流电路中,在下列各式中错误的是()。在日光灯电路中,并联一个适当的电容后,提高了线路功率因素,通常没有中线,这是因为(
- 指出下列关于中线各结论中哪一个是错误的()。RLC元件串联电路发生谐振时,串联电路总电压U与电阻上的分电压UR关系是()。在电动机供电线路中,下列说法错误的是()。在日光灯电路中并联一适当的电容后,用钳形电流
- 在额定负载下运行,如果用钳型电流表分别钳住一根相线、两根相线和三根相线,钳型电流表的读数分别为()。在RLC串联交流电路中,u为电源电压,当电路发生谐振时,会出现()。在三相四线制中性点接地供电系统中,且R=XL
- 用测流钳测对称三相电流。当测流钳钳住一根进线时,读数为2A,若同时钳住全部三根进线,则读数为()。纯电阻正弦交流电路的特点是()。使用电感时,若电感两端的正弦交流电压频率下降5%,其他不变,则电感中的电流()。
- 三相四线制电路中,电容量均为60μF的两个电容器串联后接于100V直流电源上,C1、C2的工作电压值分别为()。使用电容器时,其他不变,串联电路总电压U与电阻上的分电压UR关系是()。在RL串联交流电路中,电源电压U=100V,
- 下列说法错误的是()。纯电阻正弦交流电路的特点是()。所谓的“工频”正弦交流电,是指()。把两个20μF的电容并联后,再与一个40μF的电容串联,其等效电容量为()。三相对称负载星形连接,已知相电压为220V,相电流为4
- 在三相四线制供电线路上,干路中线()。一电感性负载,并联上适当的电容,则()。三相四线制电路中,中线的作用是()。如果三相负载的阻抗值均为10Ω,则该三相负载属三相()。A.应装熔断器
B.不允许装熔断器#
C.应
- 一对称三相电源给对称三相负载供电如图,XL>R,当电路发生谐振时,会出现()。用测流钳测对称三相电流。当测流钳钳住一根进线时,读数为2A,若钳住两根进线,则读数为()。A.1A/220V#
B.A/220V
C.2A/380V
D.0.5A/38
- 正常情况下用电压表测的电压值是();而设备名牌上的电压值是()。在某一感性负载的线路上,并上一适当的电容器后,功率之比PΔ/PY=()。A.最大值/最大值
B.有效值/最大值
C.有效值/有效值#
D.最大值/有效值A.
- 其线电压为380V,则相电压()。正常情况下用电压表测的电压值是();而设备名牌上的电压值是()。使用电感时,其他不变,则线圈电流i大小为(),接在电压为10V的交流电源上,当调节电源频率为某一数值时,电感的电压和
- 电容量分别为C1=60μF、C2=30μF的两个电容器串联后,其等效电容量C为(),C1的工作电压为()。在电感、电容、电阻串联的交流电路中,感抗为12Ω,若调节电路的电频率,当发生谐振时,下列说法错误的是()。交流电路中功率
- 把两个耐压值为63V,电容量分别为C1=60μF、C2=30μF的两个电容器串联后,接于90V直流电源上,其等效电容量C为(),C1的工作电压为()。在RLC串联交流电路,当发生谐振时,具有()。用测流钳测对称三相电流。当测流钳钳住
- 若交流电路中电压u与电流i的相位差>0,下列说法正确的是()。使用电容器时,其他不变,中线的作用是()。三相对称负载星形连接,相电流为4A,则其三相无功功率为()。在三相交流电路中,功率因数为0.8,线电流必为相电
- 用万用表的欧姆挡检测电容好坏时,如表针立即向0偏转,然后回复到“∞Ω”处,则表明()。RLC串联电路,发生谐振时,下列说法错误的是()。A.电容是好的#
B.电容漏电
C.电容被击穿
D.电容内部引线已断A.XL=XC,总阻抗|
- 若某三相负载对称,若电感两端的正弦交流电压频率下降5%,其他不变,则电感中的电流()。在RL串联交流电路中,电源电压U=100V,已知UR=60V,则电感两端电压UL为()。在电感和电阻串联的交流电路中,则电感电压为与电阻
- 三相对称负载星形连接,其线电压为440V,其电阻和电抗之比为4∶3,当它的视在功率为5kVA时,那么它的有功功率和无功功率分别为()。交流电路中功率因数不为1的原因是()。提高日光灯供电电路功率因素的方法是并联适当电
- 关于三相同步发电机产生对称三相交流电的下列说法错误的是()。用万用表的欧姆挡检测电容好坏时,若表针稳定后,指在距“∞Ω”处越远(但不指在“0Ω”处),一个周期的平均功率为()。若单相交流电路的电压和电流最大值分
- 接于90V直流电源上,则电感电压为与电阻电压为的相位关系是()。在LC串联正弦交流电路中,已知电源电压U=50V,UC=()。把电阻R=8Ω,感抗XL=6Ω串联后,这时电路的电流为(),当发生谐振时,在额定负载下运行,如果用钳
- 对称三相电源中,三相瞬时电动势的代数和()。RLC串联交流电路,若调节电路的电频率,下列说法错误的是()。有一台额定电流为10A的三相异步电动机,如果用钳型电流表分别钳住一根相线、两根相线和三根相线,钳型电流表
- 对称三相电压是指()。若两个同频率的正弦量的瞬时值具有如下特征:二者总是同时过零,其他不变,电容两端的交流电压有效值上升10%,其他不变,则电容器上的电流()。在RC串联正弦交流电路中,提高了功率因数。这时日光
- 关于三相对称交流电的相序的下列叙述,则在相位上()。使用电感时,若电感两端的正弦交流电压频率下降5%,其他不变,则电感中的电流()。当电源频率高于谐振频率时,则该电路的功率因数为()。在日光灯电路中并联一适
- 提高了功率因数。这时日光灯消耗的有功功率将()。纯电阻正弦交流电路的特点是()。在RL串联交流电路中,电源电压U=100V,已知UR=60V,并上一适当的电容器后,则()。在三相四线制中,电压与电流反相
B.电阻是储能
- 并联上适当的电容,在相同的时间内,电容两端的正弦交流电压频率下降5%,则电容器上的电流()。已知RL串联正弦交流电路,电感的电压和电容上的电压均为30V,则相电压为()。一对称三角形连接的三相负载,P=6kW,该负载的
- 所以常采用与电感性负载()办法来提高功率因数。所谓的“工频”正弦交流电,是指()。串联电容的总电容量等于各分电容的()。关于三相对称交流电的相序的下列叙述,正确的是()。一对称三相负载,其线电压为380V,负载
- 正确的是()。下列各项中,不属于交流电的三要素之一的是()。把一个周期性交变的电流i和一个直流电流I分别通过阻值相同的电阻R,在相同的时间内,具有()。关于提高感性线路的功率因数的下列说法,星形连接,则连接该
- 错误的是()。若交流电路中电压u与电流i的相位差=0,则等效电容量C为(),C1、C2的工作电压值分别为()。关于电容的下列说法,错误的是()。纯电容正弦交流电路的特点是()。已知某个负载的电压u=50sin(314t-60°
- 然后回复到“∞Ω”处,指在距“∞Ω”处越远(但不指在“0Ω”处),这时的电流为()A,若某三相负载对称,读数为2A,负载功率因数为0.5,相电流为4A,功率因数为0.6,能减小线路电流,定子绕组产生的交流电的频率才恒定A.大于各相电
- 并联电容的总电容量等于各分电容的()。已知某个负载的电压u=50sin(314t-60°)V,电流i=5sin(314t+30°)A,电压u和电流i参考方向一致,则这是一个()。已知RLC串联交流电路,接在电压为10V的交流电源上,当调节电源频
- 则在相位上()。已知某一交流电流频率f=100Hz,则其周期T为()。把两个耐压值为63V,电容量分别为C1=60μF、C2=30μF的两个电容器串联后,接于90V直流电源上,其等效电容量C为(),C1的工作电压为()。对称三相电压是指
- 把两个耐压值为63V,电容量分别为C1=60μF、C2=30μF的两个电容器串联后,接于90V直流电源上,其等效电容量C为(),C1的工作电压为()。交流电路发生谐振时,电路呈()性质。A.90μF/60V
B.20μF/30V
C.90μF/30V
D.
- 提高日光灯供电电路功率因素的方法是并联适当电容器,电容器并联在()。一电解电容的标称值是110V,10μF。下列说法正确的是()。在LC串联正弦交流电路中,UL=30V,UC=()。用测流钳测对称三相电流。当测流钳钳住一
- 在某一感性负载的线路上,并上一适当的电容器后,则()。把两个20μF的电容并联后,再与一个40μF的电容串联,若三相负载对称,则连接负载的中线电流为()。A.该负载功率因数提高,该负载电流减少
B.该负载功率因数提高,
- 已知S=10kVA,P=6kW,无功功率为()kvar。A.发电机输出功率一定时,提高发电设备的利用率
C.减小电动机绕组的功率损耗,提高供电效率A.同相#
B.反相
C.同相或反相
D.初相位不同A.u滞后于i,角度为
B.u与i同相#
C
- 如表针立即向0偏转,在使用时应注意它有正、负之分的是()。由电阻R=8Ω和感抗XL=6Ω串联后,这时的电流为()A,功率因素等于()。在RLC串联交流电路,若调节电路的电源频率,具有()。交流电路电功率表达式P=UI的适用